ok thanks i might change my LP aircooler to an 120mm aio
does the 120mm rad fits? or did you do something to make it fit?
did you use a drive cage for your hard drive or did you just punt in in the 3.5 slot near the front fans? can you take a closer picture of it? thanks in advance
ok, thanks for the info :)
msi gtx 1070 ti gaming and seasonic focus+ 650fx
i see thanks for the info
oh just a splitter, still not sure if i should get a fan hub or might as well use a splitter i'm running 2/4 stock fans of nzxt in my h200 (black) and i'm using a noctua u12s as a cpu cooler. i'm planning to get the chromax version of both the 140 and 120mm fans when i get some budget for it. think a 4pin pwm fan hub be a good choice for me or i should just stick with the splitter? any suggestion?
did you use any fan hub or usb hub?
i see, still not sure if i should use a 6+2 pin or just a 6 pin for my msi gtx 1080. still new to custom sleeves, i notice that in my psu the 6 pin are for molex/sata/peripherals so if i use a single 6pin and put it on the peripherals will that works? or i should use the 6+2 and let the +2 hanging around?
did you use a 8pin + 6+2pin or just 8pin + 6 pin for that gpu?
not sure if a 50cm custom cables would be enough for my h200 case, if not might as well get an 30cm extensiom cables.
i see may i request 1 picture of it connecting to the psu? because i'm gonna buy extension cables though i'm still not sure if i should get the 6+2 pin + 8 pin or dual 6+2 pin. also what did you use to spray the heatsink of the gpu?
did you use a 6pin or 6+2pin for the gpu cable?
hey buddy got another questions, did you install all the drivers from the site of asus z370-i gaming? for ex. (lan wifi chipset vga bluetooth audio)
ok thanks, i'll be posting my build here soon once 1 got a better table
almost same build with mine (case,mobo,cpu cooler, cpu, gpu(though mine got a ti)) so because of the ugly cables i want to buy a custom cable (not the extension ones (30cm)), i'm just worried that i might bought the wrong ones and have to order again. so just to make it clear you used 2x 6+2 pin (8pin)?
1 last question, is it possible if i use the 8 and 6 pin to run the gpu or should i use the 8+6pin to run it without issue? i was gonna order some custom cable and i was stuck choosing between buying a 8+6pin or the separate 8 and 6 pins from what i see you're using 8+8 pin am i right?
hey, just wanna ask how long is that cable extensions? is it 30cm or 50cm?
oh ok thanks! :D
link for that wallpaper? :D
2 240hz monitor for real? hahahaha :P
if building a ryzen pc 1 thing to remember never cheap on ram cause ram means everything to ryzen
what's the model of that monitor?
think a dominator plat would fit with the noctua nh u12s?
i too plan to repaint my nzxt h200 black to silver to match my z370-i strix and dominator plat ram + the evga gtx 1080 ftw gpu hahaha though i'm also thinking if i should just add some silver design(like a silver dragon and stuff) rather than painting it all silver
for future update, repaint the case to silver for a silver theme pc for that mobo and ram to match well
can you take a picture of the back part? cause i wan't to see how you fit the 3.5" hd
full spec build + more image + KB,Mouse,Monitor used TY! :D
i see thanks! :)
i see thanks for the reply :D also thinking of buying the msi gtx 1080 ti gaming x, but the problem i was wondering is if the gpu is tight does it affects the perfomance right? i have a h200 case from nzxt and a gtx 1050 gonna upgrade soon to rtx though the rtx series card were all 2.5 slot so that would be a problem, if not i might get a 2 slot 1080 ti
HI, just wanna know does the x470-i gaming supports g.skill trident z 32gb 3200mhz (cl16)? i mean was planning the same build but still not sure if the ram would run at it speed with no problem (cause some runs at 2933 cause the ram is not supported by the motherboard).
can you take a picture of the gpu? i wanna know if the gpu is resting on the shroud or does it gave some space to breath in
how's the temp?
got a question did yu try placing the radiator in the back(exhaust)?
does the ram runs at 3200mhz?
does your memmory runs at 3200mhz? or 2933?
what monitor are you using?
ram runs at 3000 mhz?
did your ram run at 3200 or only run on 2933?
think the trident z (non rgb) would run on 3200 mhz or will only run at 2933? the trident z is cheaper than the flare x both 32gb 3200 mhz though 1 is cl 14 and the other cl 16. any comment about this?
P.s. Still confuse about the cl things XD
Got a question sir how's the monitor?
"Stock for now and Overclock it later when needed" that's how you future prof a pc build XD
how's the temp of the gtx 1080 strix if i remember that gpu heats up a lot (from what i saw/read in the reviews about it)
if i'll use 1080p or 1440p would the temps lower right?
i see thanks for your comment :)
some says it gets loud when the temps is high, is it true?