Caselabs tweeted about this, I was like: "THIS IS THE MOST AMAZING THING EVAH"
You have the most expensive build on pcpartpicker! It is over 100k USD. The cpu on newegg business is 100k XD
Yeah. Back in the 980ti age (yes ik old lol). Mine broke within one week of purchase. When I went through RMA, my replacement was a REFURBISHED product. That was their warranty policy. Never buying their GPUs again.
I am looking at this from a watercooling standpoint. If watercooled with the included block, it will ONLY cool the GPU core, NOT the VRMs nor V-Ram. Meaning, you HAVE TO have the fans on whenever you use it. Plus, its ASUS, so you know the customer support will be crap.
I think this is technically your 2nd build BTW if you swapped coolers and cases so... Custom water loop won't help you in this case (pun intended). You need a far larger case that will be able to hold dual 240 radiators a 360 and a 120 or any for the 140mm equivalents. You need to research it heavily and without that much rad space, you will not have enough thermal capacity to overclock both the cpu and gpu. You will also need space for a pump and reservoir. I recommend you check out this subreddit for any help you need if you want to consider a custom loop (can get expensive very fast btw)
Efficiency. Lower power bills. Noise. Quality. Just to name a few.
Yes. I don't like my 10 seconds of time to be wasted by clickbait.
Much Necro I am so sorry. But PewDiePie makes over 12 MILLION USD a year now.
That's some clean schiit right there! +1 I don't think it could look any cleaner and better.
Love the build +1 Why not go with a 1080ti as dual 1070s are more?
I have the had drive in a cage slot lying down not mounted closer to the psu. It still works fine and is lying flat on the floor. You may need to go all ssd in this case (pun XD) as there are 2 mounts behind the mobo tray if you have a longer psu (like 1600 watt type stuff XD) The Evolv has some of the worst airflow and would need some modding for any good temps at all. You can buy unofficial vented front panels from people on line and you can mod the top to help with it. If you are using hdds, consider taking a behind motherboard tray hdd mount from another case (if you have one with it) and drill holes to put it there.
Guess I read it wrong or something, it might have been for corrections i am not sure.
They said for multiple items put it in the corresponding category. They only showed up in my list about 2 hours after posting.
I am so confused xD I had and empty system build and didnt even see them. Although... I only now see 2 boards, MSI m7 x299 and ASUS TUF MK2. Hmmm..
WUT. It was never there when i posted wtf mine is probably broken lol.
Most pricing I've seen was 880+ USD. But you also can't have a single slot card and you are stuck with those massive fans on it as well as the heat-sink.
Yes saw it just now, looks great!
It is a custom loop. You would have to buy each part separately and assemble it yourself. Check out Jayztwocents YouTube channel for more info on custom loops. If you wanted to make your own, I would do a lot of research and check out EKWB.com and their water-cooling kits, they have everything you need at an affordable price.
Misinformed anti-parallel loop watercooling people imbound
Nice parallel loop! +∞
FYI, The xspc ex360 is actually the worst watercooling radiator of recent times. The GTS is far superior, (more than doubles its performance) http://www.xtremerigs.net/2015/02/11/radiator-round-2015/7/
Don't get the poseidon cards. They're coolers are worse than waterblocks, you cant take the fans off, and they are more expensive than just buying an EVGA FE and putting a waterblock on them. They are the most pointless things and a waste of money.
We already had it :/
Love the build. Hate the soft tube. +1 XD
U can fit dual 360mm Radiators in the case (would have helped temps significantly)
Note: you do need slim radiators (Hard Ware Labs black ice nemesis GTS rads are the best slim ones)
THE POINT IS THERMAL HEADROOM. Putting it in between wont make a noticeable difference if it is in-between or not. I need to have a total of 480mm of radiator space to adequately cool two overclocked major components. It is very important, I would have had far less cpu and gpu oc without it.
It is fine if front is an outtake, but otherwise it should be on top if possible
Certainly not maxed out completely. I will not get over 60 in division, wild lands, and a few other titles (Looking at u, Crysis 3). You would want to go with x99 (x299 soon) and probably two 1080ti for consistent 75+ fps
Could not stop the sag. The bend was quite difficult to keep symmetrical. Yeah rip OCD
The temps are about 1-2 C different than it would be if I there was a rad in between. The rule of thumb is 120mm of radiator for each component and 240mm for every component overclocked.
Thanks for telling me! This looks amazing
Nice build! Leek testing my first one right now =D (hardline) Are the EK Hardline fittings push in or compression that you used?
Looks great! Is that UV fluid or tubing - if not that would look amazing! How did you fill that, the port looks like it is right up against the front of the Manta. +1
Oh.... It must be the 1.0 model.... I never knew! +1
You can have a second 360mm Radiator in the front and on top. Jayztwocents did it and it says you can on the in-win website.
Nice Build, how do you use the rear IO?
Wut case is dis. +1 Gud build m8
Didn't everyone hate the 901 when it came out... or was it the 904? Looks noice but that case should be matx
U were 2nd :'( yee live builds
Omg. This Case. NOOooooooo.... I built my brother a PC in this case and it was a nightmare. The PSU was too this to fit in the bracket. The AIO tubes went over the gpu, I had to keep trying to get it out when there was a connection on the MOBO directly under part of the gpu. I had to do this many times and almost broke the slot trying to open it. Nice build and I hope your process was easier than mine :)
Did u miss the most obvious joke ever?
Evga ****** air, I mean Hadron..... Someone has got to mess that up.
+1 Great Build
Saw this on reddit yesterday. It twas a amazballs. +22
This looks great, but have you considered switching to hard tubing. (I think there are some black ones by alphacool). Would look even better =D
Currently planning my 1st water cooling loop and going to do it with hardline tubes :)
Never saw that. Thanks for letting me know.
When you realize you mounted your CPU block upside-down. :(
Oh srry I am blind apparently. Noice build btw +1
What rads are those? And how did you mount the res?
What fittings are these? They look great. Love your build +22
I wish you had a custom loop data base. That would be the most amazing thing ever!
Few things: Corsair has vengeance RGB now.... If you are going with RX480 8GBS, I would take a 1070 or even 1080. Why not go with an m.2 2280 or something instead of PCI-E? It will save you some space and give you better airflow to your GPU.
Yes, I believe it will help you in a few cases. But I am not 100% sure.
I don't think it is possible to SLI 1060s.... LMK If I am wrong.