* PCPartPicker may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. Learn more here.
ATX Mid Tower
Side Panel Window
Power Supply Shroud
Front Panel USB
Motherboard Form Factor
- Micro ATX
- Mini ITX
Full-Height Expansion Slots
Half-Height Expansion Slots
Maximum Video Card Length
430 mm / 16.929"
- 494 mm x 210 mm x 497 mm
- 19.449" x 8.268" x 19.567"
External 5.25" Bays
Internal 2.5" Bays
Internal 3.5" Bays
- 51.559 L
- 1.821 ft³
- 41 points
- 50 months ago
from completed build MSi X99 Godlike Gaming / aka Swan Song
very simple case, I really like the removable fan grill on the front for easy cleaning and the magnetic filter for the top fans and the bottom of the case as well. The really open area's are the back of the case where the i/o is. Nice finish, overall very spacious for a small package.
- 31 points
- 62 months ago
from completed build Tiny Tina 2.5
Looks beautiful coming out of the box. The front fan door is a bane in my existence. It's only held on by clasps, which one broke because the female end (attached to the case) would not catch because it was also broke. Very little cable management behind the tray. Only marginally more than the cheap $30 cases. SSD slots are in a retarded spot and should mimic the 750D as far as placement is concerned. Not enough USB 3.0 slots, but that's just how I feel for paying over $100 on the case. Minus the door, build quality is really solid. Noise levels are dampened, but that could be my setup using AF120s.
- 26 points
- 50 months ago
from completed build Big Dreams Empty Wallet
Love this case very clean and sleek looking and also very good quality for being a high air flow case it is still very quite i love the dust filters on it makes my OCD feel great but the only thing i got to complain about is the front panel wires they could be a little longer i wont take a star off for that.
- 20 points
- 61 months ago
from completed build Ditch the damned iMac build
I'll say that I'm really happy with this case when all is said and done first and foremost. I am only using the one SSD as my system drive which is behind the MB, and I have an external HDD for media/files so I pulled out the drive tray altogether so it's full of room for good air flow.
couple things I'm not totally happy with but will likely get over quickly..
the push to release hinged thing on the front panel.. every.. fricking.. time.. I go to move the case at all, I accidentally pop it open on one or both sides. annoying, but not a deal breaker.
the window seems like an actual dust magnet, like, if I dropped tiny bits of sand from waist height about 2 ft away from this thing, I'm almost positive most of the grains will defy gravity and be pulled over to stick to the window!? it's like it's statically charged...
the finish on the front is nice, but seems to mark up really easily.
- 20 points
- 54 months ago
from completed build Well Deserved Upgrade
I absolutely love the clean looks of this case. It was a pleasure to build in, with plenty of room for components and easy cable management. However, the 5.25 drive cages aren't removable so my tubes for the H110i GT are sort of trapped, and the side panels seem very flimsy and not up to par with the rest of the case.
- 19 points
- 61 months ago
from completed build Blackbird
The Corsair 450D was mainly a cosmetic choice by the client, although I feel it offers a effective open air design for increased cooling potential, despite some lacking cable management support.
- 16 points
- 41 months ago
from completed build Asus Corsair Black and Gold
This case is elegant and simple. Cable management was very easy. I am a little bummed because I had originally planned on buying its bigger brother, and the 120mm fan spot on the bottom is only available for smaller power supplies, and the fan I bought to go there had to be re purposed.
- 15 points
- 60 months ago
from completed build X1
Great case with everything a PC builder may need out of a computer case, but not enough space behind the mother board for wiring if the power supply isn't modular
- 10 points
- 58 months ago
from completed build ICE A.A.G.E. (First Build Easy, Fast, and Affordable $1400 Build w/o EXTRAS)
The simple and elegant design was exactly what I was looking for. Cable minding is extremely simple with guide holes and plenty of tie down points for zip ties. Im really satisfied with the amount of space I had to work with. Fits every component without a problem.
- View Compatible CPU Coolers
- View Compatible Fan Controllers
- View Compatible Motherboards
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters