Description

Build started with the Snow white Thermaltake Core P3, a favorite case for me. Originally it was supposed to be a simple motherboard and CPU upgrade on an old case using an Asrock Extreme4 z390 and 9600k. Once the part showed up, it was realized one or both were DOA and I had to RMA, and that point I went bigger. Moved the to the Core P3, Asrock Z390 Taichi /w the 9700k. Decided to go a custom loop with various components hand picked for quality.

I started the build with a single reservoir soft loop, and decided i want a challenge going to a double reservoir and finally a triple reservoir. All for anesthetics and the build challenge. For me, building is half the fun.

****For everyone asking about the small screen with the system info thats built into the case.... It is a 7 inch Raspberry Pi screen that has HDMI. I am using AIDA64 software and the sensor panel built into that software. It is highly modualr and you can configure literally hundreds plugin combos and make it look any way you want. Should you ever decide to set one up (its very easy), I can link my Sensor panel to you to make it easy for you to get started.

Comments

  • 5 months ago
  • 10 points

this is super awesome! I bet it can run tetris! +1

  • 5 months ago
  • 5 points

I don't know tetris is pretty demanding

  • 5 months ago
  • 2 points

lol

  • 5 months ago
  • 2 points

But can it run Crysis

  • 5 months ago
  • 3 points

Yes. YES. YEYESYEYSYYEYSEYYSEYSEY

  • 5 months ago
  • 7 points

Lay off the drugs kid.

  • 5 months ago
  • 2 points

But can it play Minecraft with ray tracing at 4k?

  • 5 months ago
  • 4 points

Pinball for life

  • 5 months ago
  • 3 points

Tetris all day is my motto

  • 5 months ago
  • 3 points

mine is "I play tetris too much". But sadly, i have yo use my school computer for tetris. My completed build is the PC im stuck with

  • 5 months ago
  • 2 points

you're amazing idk why you just are

  • 5 months ago
  • 1 point

I don't know either?

  • 5 months ago
  • 1 point

look at his completed builds

  • 5 months ago
  • 1 point

Lol

  • 5 months ago
  • 1 point

Took me years to get to this build. You'll get there

  • 5 months ago
  • 2 points

Yeah. Im starting out with a rig that has a Ryzen 5 1600 and an RX570.

  • 5 months ago
  • 2 points

I started out with a Pentium 2 on Windows 95 , 256 megabytes of RAM and no GPU. I would say you're doing all right. It might not be the best but it'll get the job done. Save that money. You'll get there.

  • 5 months ago
  • 2 points

I'm also probably a lot older than you, this is my 9th or 10th build. .... First ever Hardline build, previous have just been AIO cooling solutions

  • 6 months ago
  • 8 points

It appears you have truly and fully embraced the phrase "I wanted to, and I could, so I did". Nicely done!

  • 6 months ago
  • 3 points

Sums it up nicely

  • 6 months ago
  • 3 points

Setup Wars???

  • 6 months ago
  • 1 point

Sure let's goooo

  • 6 months ago
  • 2 points

JESUS MAN

  • 5 months ago
  • 1 point

Yes my son?

  • 6 months ago
  • 2 points

Hi man, congrats to you, this is a very good job (patience has repaid you) . I see you are a man of culture as well.

Could yuo please let us know what kind of device is the 'little' display with the stats of the pc? I need it! https://media1.tenor.com/images/8ff22ef45387f9ae7122fdc24bb7e294/tenor.gif?itemid=12142810

  • 6 months ago
  • 2 points

7 inch raspberry pi hdmi screen running customized Aida64 Sensor Panel

  • 5 months ago
  • 2 points

Did you program it yourself? Would you be willing to share the program?

  • 5 months ago
  • 2 points

Yes I made the designed the sensor panel. You can really make the layout however you want.

  • 5 months ago
  • 2 points

It's AIDA64 sensor panel and I could share my build if you wanted to play around with it

  • 4 months ago
  • 1 point

I am also very interested in your customized sensor panel if you're still willing to share it, oh pc deity.

  • 6 months ago
  • 1 point

Thanks, I'll try it!

Maybe will search for instructions also xD.

So say we all.

  • 6 months ago
  • 2 points

Very very purdy ;-) I smell a feature...

  • 6 months ago
  • 1 point

Thanks

  • 6 months ago
  • 2 points

Nice tubing runs. Slick looking setup for sure, good job. What LCD screen and software are you using in the lower left of your build? I love that. :-)

  • 6 months ago
  • 1 point

Thanks for the compliments. The screen you are looking at is a 7-inch raspberry pi with HDMI connection, running aida64 sensor panel

  • 6 months ago
  • 2 points

Thank you! I'm researching those now. They look top notch.

  • 6 months ago
  • 1 point

For sure!

  • 5 months ago
  • 1 point

7 inch raspberry pi hdmi screen running customized Aida64 Sensor Panel

  • 6 months ago
  • 2 points

Dude, that water block is awesome!

  • 6 months ago
  • 1 point

CPU or GPU?

  • 5 months ago
  • 2 points

CPU, is it bykski?

  • 5 months ago
  • 1 point

Cpu is XSPC Raystorm

  • 5 months ago
  • 2 points

Dam, I've never seen it before but it looks sick.

congrats on feature btw

  • 5 months ago
  • 1 point

I had no idea I was the featured build, cool

  • 5 months ago
  • 1 point

Thanks!

  • 6 months ago
  • 2 points

This is the best build I've ever seen . Thank you for blessing my eyes.

  • 5 months ago
  • 1 point

You are blessed my son

[comment deleted]
  • 5 months ago
  • 2 points

Might I suggest you work on your cable management. Other than that, amazing build. The PC alone looks beautiful.

  • 5 months ago
  • 2 points

I could care less about my cable management. I have too many devices coming from too many directions to pretend like I don't have cables. Thanks for the comment.

too many people care about perfect Cable Management these days, it never used to be a thing.

  • 5 months ago
  • 2 points

I was more concerned with the PC build be honest

  • 5 months ago
  • 2 points

THAT is one slick *** build and ROOM!

You know we like it when the down votes start to creep up :) "kiddie votes"

7 inch raspberry pi hdmi screen running customized Aida64 Sensor Panel As another member asked about this slick screen, can you share more info? Link? HDMI hook up? Software on the display. That screen tells the whole story of your build. Tops it off :)

  • 5 months ago
  • 1 point

Yeah I never understood the down votes...

What info you need? The screen can be bought on Amazon or ebay for 30 bucks. Aida64 is the software. Has monitoring software thats completely customizable. I can link you my setup if you ever want to set it up

  • 5 months ago
  • 1 point

Any info will get me excited! Amazon link? yes, link to setup would be great. That screen is so full with color, like it

  • 5 months ago
  • 1 point

I bought mine on eBay. Don't have a link but it's an easy search.

Just get one and when your ready I can share my sensor panel and walk you through setup

  • 5 months ago
  • 2 points

Awesome build! Simply gorgeous.

  • 5 months ago
  • 1 point

Thanks friend

  • 5 months ago
  • 2 points

Nice!!

I have my P3 hung on the wall as well. I held off on the water loop worried about the weight. What wall mount bracket did you use?

  • 5 months ago
  • 1 point

Mount for a TV up to 120 pounds

  • 5 months ago
  • 1 point

Can you link to the one you used? I couldn't find anything that looked small enough that really held over 60lbs. Thanks.

  • 5 months ago
  • 1 point

Tilting TV Wall Mount Bracket Low Profile for Most 23-55 Inch LED, LCD, OLED, Plasma Flat Screen TVs with VESA 400x400mm Weight up to 115lbs by PERLESMITH https://www.amazon.com/dp/B01JRNIWJG/ref=cm_sw_r_cp_apa_i_qGq8CbVJCHPAQ

  • 5 months ago
  • 1 point

Thanks!

  • 5 months ago
  • 2 points

what a beautiful build enjoy it man

  • 5 months ago
  • 1 point

Thanks brother. Enjoying it so far

  • 5 months ago
  • 2 points

wow, just wow

  • 5 months ago
  • 1 point

Yes just yesssss

  • 5 months ago
  • 2 points

love the LED's on the CPU block. Is it XSPC's??

  • 5 months ago
  • 1 point

Yes sir! Raystorm pro . I ran the LEDs to separate controllers

  • 5 months ago
  • 2 points

It looks amazing!! A superb build. Love it!!

  • 5 months ago
  • 1 point

Much thanks bud!

  • 5 months ago
  • 2 points

no problemo brother

  • 5 months ago
  • 2 points

What is the small display that is showing performance called and where can I purchase one

  • 5 months ago
  • 1 point

Check the build description. All the info there

  • 5 months ago
  • 2 points

can you make a Copy of you interface and leave a dropbox link?

  • 5 months ago
  • 1 point

I can private message one

  • 5 months ago
  • 2 points

Can it run Windows 8 Space Pinball? Nice Build. +1

  • 5 months ago
  • 2 points

Oh hell na

  • 5 months ago
  • 2 points

Very impressive build! Like the white coolant as well flowing through!

  • 5 months ago
  • 1 point

Thanks bud

  • 5 months ago
  • 2 points

wow it looks amazing. just wondering why you need to 2 reservoirs just to liquid cool the cpu and gpu waterblocks. Do you see any benefits in having 2 reservoirs. Is it a TT P5 case. Did you wall mount it? Can you provide some details on the wall mount. I have the black version of the P5 case but it makes me nervous to wall mount the rig due to its sheer weight.

  • 5 months ago
  • 1 point

Well actually it has three reservoirs if you look at the pictures. no there's no actual benefit to having three reservoirs, it's all aesthetic value and build challenge. It is a core P3 case and I'm using a thin mount for a tv rated at a 110 pounds

  • 5 months ago
  • 2 points

it looks stunning though. I can imagine the hard work you must have put in to create those bends. well done.

  • 5 months ago
  • 1 point

Thanks bud. It was some work for sure

  • 5 months ago
  • 2 points

Mind Blowing dude, mind blowing. This is The Next Level!! Well done.

  • 5 months ago
  • 1 point

Thanks dude

  • 5 months ago
  • 2 points

what is the name of that screen on the psu? can someone leave a link? thanks.

  • 5 months ago
  • 1 point

Check the build description

  • 5 months ago
  • 2 points

Its gonna take a lot to knock this off feature! This is crazy!

  • 5 months ago
  • 2 points

Woot

  • 5 months ago
  • 2 points

Haha in like 5 months me and my friend are gonna do a rtx 2080 ti, i7 9700k custom loop but idk if that will even beat this. Ur a pc god my friend

  • 5 months ago
  • 2 points

Love to see some pics ma dood

  • 5 months ago
  • 2 points

Yea also what are ur thoughts on the 3rd gen ryzen and rx 5000?

  • 5 months ago
  • 1 point

Heres the link to the parts list u clearly know what ur doing so what do you think? https://pcpartpicker.com/user/griffinordonkey/saved/WJxLJx

  • 5 months ago
  • 1 point

I am tentatively excited for it. I really hope the red team has what it takes to overtake Intel for awhile. Looking like they will so far. If I hadnt need a new build, i would have waited for the 3800x for sure. The GPUs probably wont ever be more powerful then Nvidia though

  • 5 months ago
  • 2 points

lol "All for the anesthetics" so you went bigger to reduce the pain? XD I think what you want to say is aesthetics. I just found that funny.

  • 5 months ago
  • 1 point

I'm not sure what you mean by reduce the pain? I didn't build it just so I could say aesthetic.....the main purpose of all the extra reservoirs is literally for aesthetic value..

Or I could say just to look cooler if that helps? Plus I wanted something different, there's nothing else out there that looks like this, especially on the core P3

  • 5 months ago
  • 1 point

you missed the point. You used "anesthetics" which is something to reduce pain or feeling, a numbing agent essentially.
You meant to use aesthetics. Don't get me wrong it's a beautiful build, i just found it funny with the typo, made it sound like you went bigger and more expensive to reduce the pain of something XD

  • 5 months ago
  • 1 point

Oh I see what you mean, I thought you misspelled it. No I think that was a voice to text response that went wrong

  • 5 months ago
  • 2 points

I got that 100th upvote! Also, fantastic build!

  • 5 months ago
  • 1 point

Ding ding

  • 5 months ago
  • 2 points

so pretty! :)

  • 5 months ago
  • 2 points

absolute ****** mad lad

  • 5 months ago
  • 1 point

+1 THAT'S A GREAT BUILD MAN!

Anyways, can you list me the screen in the case? I am looking for a decent one! Tell me your opinion as well! Thanks!

  • 5 months ago
  • 1 point

7 inch Raspberry pi screen running aida64 sensor panel. Fairly simple setup

  • 5 months ago
  • 1 point
  • 5 months ago
  • 2 points

thank you

  • 5 months ago
  • 1 point

synthwave just kicked in yo!

  • 5 months ago
  • 2 points

Beepbooop

  • 5 months ago
  • 2 points

lol

  • 5 months ago
  • 1 point
  • 5 months ago
  • 1 point

this is one of the coolest builds I have ever seen! keep up the great work!!!

  • 5 months ago
  • 1 point

Thank for the kind words !

  • 5 months ago
  • 1 point

With a setup like this, you're well positioned to take over the world. But even if you don't manage that, I'd still like to give you a +1 for such a fracking awesome build!

  • 5 months ago
  • 2 points

Me and you Pinky, today we are gonna take over the world

  • 5 months ago
  • 1 point

What is that block under the rad for?

  • 5 months ago
  • 2 points

That's the pump

  • 5 months ago
  • 1 point

Ah. Interesting. I haven't seen a lot of loops without a pump-res combo. However, I don't know much about water cooling.

  • 5 months ago
  • 1 point

You can do more custom stuff with separated pumps and reservoirs

  • 5 months ago
  • 1 point

I can tell. This thing looks freaking amazing! I'm inspired!

  • 5 months ago
  • 1 point

I can tell. This thing looks freaking amazing! I'm inspired!

  • 5 months ago
  • 1 point

<3

  • 5 months ago
  • 1 point

Very nice work!

  • 4 months ago
  • 1 point

What is the desk

  • 3 months ago
  • 1 point

It's just a generic desk I got from when I used to contract for the government. Unfortunately they're not for sale to the public

  • 3 months ago
  • 1 point

So if I try this myself how am I supposed to figure out all that custom stuff?

  • 3 months ago
  • 1 point

Trial and error? I had to myself. It's pretty simple. Just time consuming

  • 1 month ago
  • 1 point

Looking at this build made me nut