My previous build was THE NANO GOD: AMD EDITION the end result was a bottleneck shitstorm because for the CPU practically having 2 cores (AMD A10 7850k) with an overclocked 980TI doesn't end well performance-wise this PC is a completely overkill mini itx build with as much cooling as posable and some of the most high-end components currently purchasable (2014/2015) this meant for overclocking/tinkering that's why the high amount of cooling capacity.
Sorry about the compressed to death photos.
MONITER RES: 2560x1080
MONITOR REFRESHRATE: 160hz
BUILD TIME: 20+ hours in total
MAX LOOP TEMP: 40c
MAX CASE AIR TEMP: 28c
LEAKS DURING BUILDING: 3
LEAKS AFTER BUILDING: 0
I USED THE FINE SPRED METHOD FOR THERMAL COMPOUND
Overall the pc is great other than a few issues it is mostly perfect i can play games edit and render videos again and play games my DSL internet distribution cabinet finally is fiber so was finally updated to VDSL2 so i now have a fast pc and the connection to get things done (only 20/5mbps tho) if anyone wondering if im useing the wifi no im useing Ethernet.
Issue 01: My ram was damaged so that added 1 day to the build time also i had to pull apart the ram block top peace while the loop was filled and will have to fully disassemble and redo my loop at some point so now there's a ram water block just hovering in the middle of my case (4 months later i redid the loop without the RAM block)
Issue 02: The system just doesn't like low overclocks eather high or even stock otherwise it crashes after about 5-10min of load. (2019 it was strange but true and i never figured this out but got it stable for a few months at 4.4)
Issue 03: It's bloody imposable to get a good temp read on the CPU and also due to my main fan being controlled my CPU temp which is not correct its running at 100% at 45c when my loop is sitting @30c but GPU temps work 100% realistically i ran a benchmark for a couple of hours put my hand on both radiators and all 3 water blocks and the radiators were warm, not hot and the blocks were like half the heat of the radiators also i cant power 1 of the back fans as well as due to low heat output my room temp has go from 28c to 17-23c so im now freezing now.
Issue 04: notice how two components are not purchased the pc is only 95% done im also missing 5 LEDs for the water blocks (added the LEDs before it died never got updated photos)
Issue 05: the front panel power button is completely broken I have to use the power button on the motherboard to turn it on but its on the back io at least. I also had to plyer my way thru a metal support bar to access the fill port of the pump/res
Issue 06: THANK GOD I HAVE A AIR COMPRESSOR AND A HOVER basically, during construction, i ****** up big time not once but 3 times during draining/filling i lost almost all of my nanofluid by knocking over my container during draining and filling so in the end i had to fill 40% of the loop with distilled water the third time i turned the pump on and it sprayed fluid under the ram and PCI slot i removed and cleaned the fluid i was lucky not to kill anything it might have been the leak that killed the ram but idk it's been running for over well over 2 weeks and except for windows 10 issues everything works well to the result i wanted.
Issue 07: during attempted ram block reinstall the loop sprayed the back of the case and motherboard and me and didn't get under anything luckily but some went in my eye and i got some flu-like illness a day later so no i didn't die from poisoning but i couldn't get out of bed for 2 days and was in pain to the point where i felt like i was going to die i guess the moral of this event is not to mess around with a pressurized loop without draining.
OpenGL: 112.30 FPS
Update (01.08.2019) So after disassembly turns out the bloody paper/plastic label for the CPU/MB block was still on its base so for 2 years it was melting over and over and over and the CPU or MB failed one day so the build was surpassed by the Ebay Workstation.