Description

I built this pc trying to spend the less possible and at the end have a pc that can run games in high settings and 30 fps. right now i tried playing: the witcher 3, crysis 3, far cry 4 and the results are good. stressed gpu temps are around 65 °C , stressed cpu temps are around 60 °C. i haven't done any overclocking.

Log in to rate comments or to post a comment.

Comments

  • 38 months ago
  • 6 points

FX 6300 is not that bad as many thinks !

  1. Change the CPU cooling on bigger and better ! stock cooling is bad...;)
  2. Then in Bios setting disable cool'n'quiet setting - the speed will be min 3,5 t 6 x 4.1 with turbo
  3. I have closed water cooling from Deepcool Maelstrom 120 and with the setting i wrote above under load temps are max 58*C
  • 38 months ago
  • 2 points

thanks for the tips :)

  • 38 months ago
  • 4 points

Your gonna get negative for the fx cpu. But I have two fx6350 cpus and they game/run normal duties very well. Its a good cpu. If it works for you then that's all that matters. Plus you can always get a 8350 later. +1.

  • 38 months ago
  • 2 points

Great build, you got a lot bang for your buck... +1 for cable management.

  • 38 months ago
  • 2 points

Dont listen to intel fan boys wait until they realease that games wont be optimized for intel anymore moving forward. They still dont get that no one cares about them and large companies are adopting AMD on price and cores . Sony , Microsoft .... Idiots FX chips are great and so are Ryzen. Cheaper and rock solid I run a bench in a custom PC shop I have had more dead intel I7 than any other chip . FX is cost effective now this dumb asses dont understand that most games moving forward are GPU dependent. Good build man

  • 38 months ago
  • 1 point

Nice budget build! That case doesn't look bad for the price.

One thing I would say though is, strictly for gaming, a Pentium would have been a better choice for about the same price for the CPU/motherboard combo. But hey, the 6300 should still do fine at least in the short term.

  • 38 months ago
  • 1 point

That's a pretty good budget. I recommend dropping in a SSD and migrating the operating system once you have some spare money. It doesn't need to be huge, just something to store your OS and a few games/programs. Usually a 120-240gb is plenty if you manage your games and files well, saving the non-essentials on your HDD.

Other than that the build is solid. The 6300 is not a great processor, but it will get the job done. And your 30fps target is attainable, so great job. I use the 8350 in my current PC, although I have a spare PC with an i5 in it the my GF uses. Generally speaking a mid-range processor is all you really need for gaming unless you are highly competitive and what not. Personally I try for ~60FPS in most games, since all I actually really care about is a smooth frame transition not a certain frame rate. One thing that will really help that GPU perform to it's fullest is a freesync monitor. I have one for my R9 390, and it's super smooth even if the fps is manually capped at 30. They're costly, so it makes sense to make it a separate purchase from the main build when you're on a budget.

  • 38 months ago
  • 2 points

PS: Cable management on a non-modular PSU... beautiful work. I hate non-modular PSUs because I'm lazy about cable management. Excellent work.

  • 38 months ago
  • 1 point

Great job with cables, how loud does that stock cooler get??

  • 38 months ago
  • 1 point

well it's a little loud. but with this case it's the front intake fan(when at full rpm) that makes the most noise of all. maybe it's so because of the dust filters

  • 38 months ago
  • 1 point

Good job on part selection and very good for on the budget.

Upgrade the stock cooler to a least a hyper 212 evo or CRYORIG H7 Tower Cooler For AMD.

And OC that FX to around 4.2 to 4.4GHZ.

  • 38 months ago
  • 1 point

what do you think about a DIY rear top fan, by cuting a hole, where i could mount an exhaust fan. right now i'm using the upper side pannel fan an exhaust one. otherwise cpu tems would get up to 70 ° C

  • 38 months ago
  • 1 point

Great build i would have used almost the same parts. That fan my friend ;-)

  • 38 months ago
  • 0 points

You could go with Pentium G4560, it's actually a better choice than FX 6300.

  • 38 months ago
  • 2 points

You can't find it anywhere right now, its pretty much out of stock everywhere.

  • 38 months ago
  • 2 points

Depends on the country

  • 38 months ago
  • 1 point

Yet, he builded his PC on 8th of March, and I'm pretty sure G4560 was in stock.

  • 38 months ago
  • 1 point

He just might have wanted more cores then, which is fine. It'll perform better with multi-core applications.

[comment deleted by staff]
[comment deleted]
[comment deleted by staff]
[comment deleted]
[comment deleted]
[comment deleted]
[comment deleted by staff]
[comment deleted]
[comment deleted by staff]