Description

Hello people!

The journey with this case has been amazing for me due to the build quality and how small the case is. No unnecessary space at all in this case. Although I should've listen to some videos from how this case barely fits any gpu with a waterblock with the side panel tempered glass "close" (I'm using the ftw3 here).

Time lapse build : https://www.youtube.com/watch?v=TfQsjaDokBU

I went through some ideas such as...

-Push/pull configure

-Distroplate (Thankyou Radikult)

-3 Radiators

-Building custom cables

-Dual loop

Something new I tried out

-Using acrylic tubing (SO MUCH EASIER TO USE THAN PETG IMO)

-Limiting myself down to only 2 bends only for cleaner look

In the end most of those ideas came through, for the first time I tried building my own cables. My finger tips was so stress out from pulling and squeezing the sleeving, it took 3-4 days to be fully healed.

IT TOOK ME 8 HOURS JUST TO MAKE 6 CABLES! AAAAAAAAAAAAAAAAAHHHHHHHHH

Well I don't have much to tell you guys, but there is a sneak peak picture for my next build somewhere in the gallery. (Feel free to ask any questions, I'll be happy to reply back)

Comments

  • 15 months ago
  • 5 points

Lol about the cables. Love your build, I'll call a feature. +1

  • 15 months ago
  • 1 point

Thankyou for the kind words !!!!!

  • 15 months ago
  • 1 point

Called it! Congrats on the feature!

  • 15 months ago
  • 1 point

Oh, I saw a build that got featured after my post so I wasn't expecting this haha.

Thank you btw!!! :)

  • 15 months ago
  • 2 points

Feature incoming +1

  • 15 months ago
  • 1 point

:)

  • 15 months ago
  • 2 points

dude, awesome build! love it

  • 15 months ago
  • 2 points

Thx :)

  • 15 months ago
  • 2 points

I love the build. I’ve been wanting to pull the trigger on this case but I wasn’t sure if the ftw 3 would fit with a water block. Just to confirm, your side panel has to be left open?

  • 15 months ago
  • 1 point

Yup, I find it better that way lol

For the 1080ti blocks that WILL fit with the panels close are the zotac and founders edition. Hope this helps!

  • 15 months ago
  • 2 points

Love the application of the violet. Beautiful computer. I want one!

  • 15 months ago
  • 2 points

Thank you the compliment!

  • 15 months ago
  • 2 points

Your builds never cease to amaze me. Amazing, keep it up. +1

  • 15 months ago
  • 1 point

Thank you so much for the compliment!

  • 15 months ago
  • 2 points

Absolutely fantastic. You are an inspiration to all builders.

  • 15 months ago
  • 2 points

Was a awesome build :) i love it

  • 15 months ago
  • 2 points

Beautiful build in a beautiful case.

  • 15 months ago
  • 2 points

nice build bro

  • 15 months ago
  • 1 point

Thankyou :)

  • 15 months ago
  • 0 points

im working on a build like yours but with only $1500 and it has blue instead of purple(viloet)

  • 15 months ago
  • 2 points

Why would you get a 1080ti now? Also, why H mobo pair with the 8700k? No storage? What kind of psu is that? (Upgrade to a EVGA G2 or Corsair H or A series)

  • 15 months ago
  • 0 points

I'm on a budget i can upgrade later, I want the 1080ti for autocad rendering, also its the best gpu that fits in my budget

  • 15 months ago
  • 0 points

Defiantly gonna go for a 1000w on upgrade and I got a old sdd from my dads old laptop

  • 15 months ago
  • 2 points

Very nice bro , so much stile . Great choice of parts and you paid so much attention to details . Even so its little dark you can still see everything nicely , just beautiful ,

  • 15 months ago
  • 1 point

Thanks man!

  • 15 months ago
  • 2 points

Dude this build looks so good. You killed it so hard! YESSSSSSSSS BB <3

  • 15 months ago
  • 2 points

<33333333333333333333333333333333333

  • 14 months ago
  • 2 points

ty friend

  • 15 months ago
  • 1 point

How come acrylic is easier than petg?

  • 15 months ago
  • 2 points

I can cut it with a dremel and it comes with ALMOST zero scratches. (You only see it if you REALLY REALLY pay attention to it) I’m sure you can cut PETG with a dremel too

It also bend easier for me, I can adjust the bends if i mess up. Its just something I personally feel is better.

  • 15 months ago
  • 1 point

Oh also PETG usually come with so many scratches for me beside EK (but they’re EXTREMELY EXPENSIVE)

  • 15 months ago
  • 1 point

Looks awesome!! Congrats on the feature!!

  • 15 months ago
  • 1 point

Thankyou!

  • 15 months ago
  • 1 point

Tis a thing of beauty! Deserving of a feature for style and elegance with great photos to boot.

  • 15 months ago
  • 1 point

Is the cable comb that's on the 24 pin mobo cables UV Reactive?

I don't know if it's just the case lighting or your camera but in the first picture it looks like it's UV Reactive, which imo looks amazing. If it is, then I'd suggest you get one more for the 24 pin and 2 per each of the gpu cables because they just look so nice and would compliment the rest of your phenomenally exquisite build.

  • 15 months ago
  • 2 points

The build already got some custom cables with precise length I measure out so adding more cable combs would just look like a mess imo. And yes, my coolant is reactive. The 24-Pin cable comb have a "Gloss White" coating on it.

  • 15 months ago
  • 1 point

Do you happen to have a link for where I can get those UV Reactive Cable Combs?

  • 15 months ago
  • 2 points

They are not UV reactive cable combs lol

Also, you need to make your own cables for the one I'm using. Or de-pin all the connectors and insert them through the wraps.

https://www.ensourced.net/wire-wraps/

  • 15 months ago
  • 1 point

I thought they were because of how they just have a vibrant looking glow in the pictures.

  • 15 months ago
  • 1 point

AAAUGHHHHH!!! MY EYES!!!! THEY HAVE GAZED UPON A STRUCTURE TOO GREAT FOR MAN TO LOOK UPON!!!!!

JK, it's not that amazing, although it's not that far off. Looks beautiful. I can't believe that you made your own cables! That would've been so time consuming, I would've given up after, like, the first one.

The ammount of time and effort you spent on this build alone qualifies it for a feature, IMO, and with how amazing it looks, it seems to qualify twice! Keep up the AMAZING work!

  • 15 months ago
  • 1 point

I only I had the time or money for this kind of build. Ahh well, a 13 year old can dream for the future. :)

  • 15 months ago
  • 2 points

Best advice for you is to do A LOT OF RESEARCH.

And note that there aren't just one go-to company for each components.

Don't spend money on unnecessary things.

  • 15 months ago
  • 1 point

i'm really itching to see this thing well-lit so i can see exactly what the loop is like :)

  • 15 months ago
  • 1 point

What mouse pad is that? the dark world map i mean. build looks amazing!

  • 15 months ago
  • 1 point

So, are you able to close your panel with GPU water block at the end?

  • 15 months ago
  • 2 points

I COULD, but there will be a noticeable gap at the bottom. Plus, I kinda like the looks of it with no glass.

(Also, I remove the front panel connector so the only way to boot my pc is to press the start button on the mobo)

I know I can start it with by using a screw driver touching the pins, but it's easier the other way :)

  • 15 months ago
  • 1 point

Thanks, I was going to build my first custom loop in this case near future. I have a 1080 Hybrid FTW, just checked the water block is 140 width, is able to fit in the case. FTW3 is too close to the limit

  • 15 months ago
  • 1 point

Do you commission your work?

  • 15 months ago
  • 1 point

Yah, are you interested?

  • 11 months ago
  • 1 point

What size res did you use? 250?

  • 15 months ago
  • 0 points

Rip to the reservior

[comment deleted]
[comment deleted]
[comment deleted]
  • 15 months ago
  • 2 points

I use node pro and yes, it can control all 6.

[comment deleted by staff]
[comment deleted by staff]