Description

This time I wanted to build a nice Ryzen beast. I chose to go with the Ryzen 1700 because it had much better bang for buck compared to the 1700x in my opinion. However right now, the 1700x is only 5 dollars more than the 1700 and if I was to rebuild, I'd go for the 1700x.

I went with the NZXT Elite Case because I I think it's the best looking out there. It's simple, clear, sharp lines, and had everything I needed in the right places, including cut outs for my stat screen, (Tutorial here: https://www.youtube.com/watch?v=RcNJA6V4tNY&t=2s ) - I also chose the case because it had an HDMI port at the front which was great for my VR headeset.

Since it had a tempered glass window, I couldn't let the graphics card face down. So I did some slight mods in order to get the graphics card to sit vertically. (Tutorial here: https://www.youtube.com/watch?v=BnNl1lhFbzQ&lc=z222fxkaim2shjr0macdp434q3fcunssdt41ch0s1plw03c010c )

Of course the whole build was planned using PCPartPicker. I'm mentioning this to just lend support to the fact that this site is trust worthy. With every build I've done, I've used PCPP and I'm super happy.

Let me know what you guys think :)

Comments

  • 23 months ago
  • 3 points

this is dope af

  • 23 months ago
  • 2 points

thanks!

  • 23 months ago
  • 3 points

Hey what's that display with temps inside the case? That's awesome!!!! +1 !!

  • 23 months ago
  • 2 points

It's the first link that is in the description is a tutorial of how to do it

  • 23 months ago
  • 1 point

im curious too

  • 23 months ago
  • 2 points

that's the stat monitor :) Link in the description how to do it. Super easy.

  • 23 months ago
  • 1 point

great! thanks!!

  • 23 months ago
  • 2 points

I've never seen that digital display before. Where did you get that?

  • 23 months ago
  • 2 points

first link :)

  • 23 months ago
  • 2 points

I'm a noob at this so how do you measure the temp/stats in your pc. In your video you just plugged the screen in but you didn't show how the stats were measured. What do you do to measure the temp

  • 23 months ago
  • 1 point

I did. In the video I showed that you launch CAM. CAM is software that monitors the stats. You can use any monitoring solution.

  • 23 months ago
  • 1 point

I like the color scheme

  • 23 months ago
  • 1 point

Awesome looking build, well thought out parts too.

  • 23 months ago
  • 1 point

In my opinion, the perfect build. It has well chosen parts, power, looks and a touch of customization. +1

  • 23 months ago
  • 1 point

thank you!

  • 23 months ago
  • 1 point

Dope build!

  • 23 months ago
  • 1 point

beautiful!

  • 23 months ago
  • 1 point

What speed are you running your memory at? I've been wanting to get a similar setup but I wasn't sure how well Ryzen would overclock with 4 dimms of ram.

Love the build! The vertical gpu looks way better then horizontal

  • 23 months ago
  • 2 points

Currently around 3000mhz

  • 23 months ago
  • 1 point

What do you think the best temp/ stat monitoring software is. Also what do you do besides just downloading the software. How does it sense what temp it is. Srry I suck at this...

  • 23 months ago
  • 1 point

I think they're all good. I use CAM because I like the layout and color customization. It detects it based on what's connected to the motherboard.

  • 23 months ago
  • 1 point

beautiful build man

  • 23 months ago
  • 1 point

Commenting so I can find this easier later; great build!

  • 23 months ago
  • 1 point

Great build! I've wanted this case for my upcoming build, but was concerned about the size and lack of spots for fans. But your temps seem good. Any regrets on this case for cooling? I assume the Kraken is bringing air in and the top and rear fans are pushing out? Are they both 140s?

  • 23 months ago
  • 1 point

yup that's right. Except the rear is 120.

  • 23 months ago
  • 1 point

Hi I came here after seeing your tutorial video on Youtube. Beautiful build! Only question is what did you end up doing to take care of the blue border around the lcd screen? It looks white and clean in the pictures

  • 23 months ago
  • 1 point

I put an acrylic frame

  • 23 months ago
  • 1 point

I added a white acrylic frame :)

  • 23 months ago
  • 1 point

Are both NZXT case fans outtake ?

  • 23 months ago
  • 2 points

exhausting yes

  • 23 months ago
  • 1 point

I will soon build a pc quite similar, and I am wondering if it would be better or not to set the top fan as intake.

  • 23 months ago
  • 1 point

So far I'm getting great temps. If you're using liquid cooling then I doubt you would need intake.

  • 23 months ago
  • 1 point

Yup

  • 23 months ago
  • 1 point

Did you do any over clocking ? Also how well would this case do if I were to do hard tube water cooling? Great build thanks for your time.

  • 23 months ago
  • 1 point

You could easily do it. There are loads of example pics of how people did it online.

  • 23 months ago
  • 1 point

dam, seen this video the other day on youtube! great build

  • 23 months ago
  • 1 point

Thanks !

  • 23 months ago
  • 1 point

+1 and 5star build bro will also like to have same build for me i like that keyboard and mouse placement too 5/5 :)

  • 23 months ago
  • 1 point

Thanks!

  • 23 months ago
  • 1 point

do i need a MICRO ATX to make the vertical GPU fit?

  • 19 months ago
  • 1 point

Nope. Any board will work.

  • 23 months ago
  • 1 point

Awesome build, ive watched the video but there's nothing about the little white cover around the mini screen so how did you get that

  • 19 months ago
  • 1 point

I bought the frame off of amazon.

  • 22 months ago
  • 1 point

Wallpaper link? Great build btw.

  • 22 months ago
  • 1 point

want to know what is that mounted under the gpu? (im a noob also)

  • 19 months ago
  • 1 point

That’s the RGB controller

  • 19 months ago
  • 1 point

yeah I figured that out but thnx for reply. Also my build was inspired by yours as I too wanted to do a vertical mount for my gpu but could not find the part so I just did it regular and still happy with result.

  • 21 months ago
  • 1 point

Ram at native speed?

  • 21 months ago
  • 1 point

i love your build and you channel! +1

  • 19 months ago
  • 1 point

Thank you !

  • 20 months ago
  • 1 point

First let me say I love your build. Next, well I'm a little late to the party but I hope you'll see this cause I'm building a rig with the same mobo and I was wondering how you were able to coordinate all the RGB stuff? I was afraid it's be impossible without more RGB headers on the mobo. Sorry if these are dumb questions, I'm a noob.

  • 19 months ago
  • 2 points

I used a USB hub :) - as for adjusting lighting. It was all software based.

  • 19 months ago
  • 1 point

Thanks for the reply!

  • 20 months ago
  • 1 point

very awesome build. do you have a link of the black riser cable not the cooler master one. tyvm! peace!

  • 19 months ago
  • 2 points

You can get one HERE.

  • 19 months ago
  • 1 point

oh yeah bills shop! tnx man! ty peace

  • 18 months ago
  • 1 point

Did you buy the case for the stat screen or did you make it yourself? And how did you mount the screen to the PC case?

  • 16 months ago
  • 1 point

It was available online. The case is just standing on the bottom of the case and has some double sided tape on the back

  • 18 months ago
  • 1 point

Fantastic build, thank you for the tutorials!

  • 16 months ago
  • 2 points

thanks for the support :)

  • 17 months ago
  • 1 point

Wow. The stat screen is so interesting. Nice build! I am deciding between the NZXT Aer RGB fan and the Corasir LL fan. The NZXT fan is wayyy cheaper than the Corsair fan, but in my opinion the corsair fan looks sick. I was going through builds using the NZXT fans and this build was an awesome discovery! Good job.

  • 16 months ago
  • 1 point

Is it possible do build this without the NZXT Hub? I have a msi Krait 3X Motherboard and also intend on getting 2 x aer fans and the kraken.

  • 11 months ago
  • 1 point

I have a question. How were you able to extend the display into the 7 inch screen? I have similar device, but only 5inch small, but I could not extend an opened window into the 5 inch screen. The way you moved the stats display into the 7 inch screen on the video. All I get is copy image of the computer screen. Is there a driver that I'm missing. Any feedback will be greatly appreciated!

  • 11 months ago
  • 1 point

Possible to use the stat display with any other software than the horrendous CAM Software?

  • 5 days ago
  • 1 point

this is just wow!

  • 23 months ago
  • 0 points
         !
  CAUTION

Tempered Glass Handle With Care

  • 23 months ago
  • 2 points

felt it added character :P

[comment deleted]
  • 19 months ago
  • 1 point

I posted link to it