Was going to update my old system but decided to build a complete new system for gaming. I spent months doing a lot of research (videos/forums) and narrowed it down to this.

I have built Atx and mAtx but never a itx so that is what I decided to go with and really building this was the most fun of all my builds. I know many people like to go with flashy RGB stuff but for me there is no reason (been there, done that with the old days of LAN parties before the internet was even the internet lol) since it is just going to be sitting in my room.

It is a system that is almost complete (just missing a couple $$$$$ parts) but once I have the GPU (either MSI Ventus or EVGA Black) I will be using my old monitor till I get the $$ for the new. Will tidy up cables when I get the GPU.

Update mid March 2019: Decided to get a MSI Radeon VII GPU and it is a beast of a card. Such a great gaming card.

Part Reviews


I admit I am a life long Intel guy BUT their CPU's cost way to much $$$$ SO..

I decided to go with AMD and it was either the R5 2600 or R7 2700 and I do like to OC so the 2600 won my pocket book (got a good deal Best buy price matched).

CPU Cooler

Knowing I was going to OC my CPU I had to get a 3rd party cooler and this is what I narrowed it down to.

It is so small this can fit in 99.99% cases and I needed small and this really fits the bill plus it clears the ram area so one can put whatever height of ram with no worries of the cooler getting in the way.

Now putting this together took me for a loop since I am use to just putting the bracket on the motherboard and having it snug/tight when I put the screws on but NOOO this was just slightly (and I mean slightly) loose. I spent an hour online looking at videos/forums etc and still it just would not firm up UNTIL I posted on the forums here and had some super help from mark5916 . It will tighten/firm up when you actually put the cooler on the CPU and then tighten the cooler onto the bracket (it is suppose to even out the tension across the CPU area).

Update 3-18-19: Had a slight issue with applying the warranty online and Cryorig got back to me very fast so super plus on the company. Also this really REALLY keeps my CPU nice. and comfy.


This is so small but can hold so much. Make sure if you use the m.2 (on back of the board) that you add that before you put the motherboard on the case.

Putting this in the case was a little tedious for I had to put some slight pressure to get the 4 holes to line up on the case/motherboard. Also would be nice to have 1 or 2 more fan connects on the motherboard so that is a star off but other than that a stellar MB to use.


Ram is Ram (this is RGB free) and I was thinking of 32gb (slightly slower) but decided to save $$ and go 16gb (faster) and transfer that $$ to my GPU.


Using this for boot OS, possibly a game but most of my games will go onto another SSD (will add in the near future). If your motherboard has m.2 slots use em (saves cable space).

Update 3-18-19: System installed Win10 from USB on m.2 with no problem.

Video Card

This is a such a wonderful card. Will be a while to really test it BUT it does fit in the Thermaltake V1 case, even though you will have to use a dremel and shave a little off the V1 case for the card to fit down like it should.


Got this at local Fry's and I adore this case (was thinking of getting a V21 case). It is actually big for a itx case BUT my big hands fit in it with no problems (long fingers do help).

Also for the Radeon VII to fit like it should I had to use a dremel to the corner of the control board that has the power/reset etc buttons (no biggie since there is nothing electronic on that part of the board anyway).

My roommate and her son was amazed that all the parts fit in this tiny case and told them there is room to put more in.

Power Supply

This PSU left so much space so that I had more than enough for cable management.

Operating System

OS is OS.

Case Fan

Decided to add a few extra fans and since the motherboard only has 2 fan connectors these can daisy chain so that the CPU cooler and the 2 fans all connect to 1.


Nice simple keyboard from my Mini Me 2011 build (I like the blue background color).


This mouse I have had since my original Mini Me 2011 build and it is still going strong to this day so decided to use it with this build.


  • 4 months ago
  • 2 points

I like Ryzen also, Intel is a lot of money.

  • 4 months ago
  • 1 point

Did the GPU fit ok length wise? I'm doing a VERY similar build with an M.2 boot drive, and a 2.5" SSD in this case with a 2070. Thanks.

Clean build! +1

  • 4 months ago
  • 3 points

Ordering my GPU this friday (crossing fingers) BUT I am going with a Radeon VII GPU (so I need to change that in my build). mm wise the Radeon VII just barely fits length wise so I know a 2070 can. Issue with some 2070 is that with the cooling fans some protrude out to much and might not let you put the side case on. I know the EVGA cards (2070/2080 etc) are nice and smooth (fans not jutting out) and will fit the V1 with no issue.

  • 4 months ago
  • 2 points


  • 3 months ago
  • 1 point

True, Any card will fit in Core V1 just make sure it's Dual slot cooler that's it, I'm fitting my RX 590 Nitro+ in it easily it's a big card but yeah you can fit 2070 easily!

  • 4 months ago
  • 1 point


  • 4 months ago
  • 1 point

Will post them when I get it. On Pre-Order (should be in my hands by the 3rd week of this month). Getting the MSI R7.

  • 4 months ago
  • 1 point

i was talking about the cpu, sorry i forgot to say that

  • 4 months ago
  • 1 point

Using Kombusterx64: for about 25 mins my CPU was steady at 48.3c and load was 20% with +/- 2%. Idle using HWinfo64 it has my idle temp at 28.8.

GPU wise it was steady at 101c with 284 FPS in window mode (1920x1017). Using my 1080p monitor till I get the money saved for a 1440p ultrawide monitor.

  • 10 days ago
  • 1 point

I never had to do any modding to get the Radeon VII to fit my Core V1 Snow Edition. Why would you do that for your Core V1?

  • 10 days ago
  • 1 point

The MSI Radeon VII card just would not fit completely inside the PCI Slot on the MB. So just took a dremel and shaved, just slightly, some extra plastic that was on the power button/usb/reset board on the case and it then fit all the way down into the PCI slot. All in all It is a great case with a great card that fits in it :)

[comment deleted by staff]