Description

This is a build we designed for a client in Japan.

The case was modded to shift the entire motherboard tray down to make room for the oversized radiator. There were also mounting points modded in for the dual reservoirs.

We started off with an entirely parallel styled design, however due to the motherboard shift, we had to convert the bottom GPU to serial. We have still kept the parallel styled tubing runs.

We hope to have a video review and build vlog up before long.

A link to the album with all of the pictures can be found here: http://imgur.com/a/nZEvW

Please check us out on FaceBook at https://www.facebook.com/ngenpcs/

Or Instagram at https://www.instagram.com/ngen.pcs/ @ngen.pcs

Thanks for looking! We hope you enjoy!

Comments

  • 29 months ago
  • 8 points

it's OK

  • 29 months ago
  • 6 points

Passable at best, really.

  • 29 months ago
  • 2 points

On a serious note, tell me about that power supply enclosure. It looks to have a pretty interesting story. (And the build is orgasmic by the way, not even close to "OK" haha!)

  • 29 months ago
  • 3 points

Haha thanks! :D

It's a special InWin PSU designed specifically for the H-Frame 2.0. Their newest line of Signature Series cases come with them. When powered on, there is an orange glow from inside that shines through. The wattage is 1065W because it has a secondary 65W part that stays enabled after the rest of the machine shuts off. This is used to power the watercooling and avoid heatspikes and fans ramping up right when the machine is turned off.

  • 29 months ago
  • 2 points

So is the water loop always running? or only after the first few minutes after shutting down?

  • 29 months ago
  • 1 point

It can be set to turn off with the system, turn off after 30s, turn off after 180s, or run continuously. It's pretty cool, actually. No pun intended.

https://www.inwin-style.com/en/gaming-power-supply/s2

  • 29 months ago
  • 2 points

Gorgeous computer!

  • 29 months ago
  • 2 points

Thanks a lot! :) We spent a decent amount of time with the watercooling layout since it had to be modded to fit the radiator.

  • 29 months ago
  • 2 points

This build is awesome! I just wish it had more pictures...

  • 29 months ago
  • 1 point

Thanks! I'm trying to get the rest to upload, but it keeps giving me errors :( I linked the Imgur album until the rest of the pics will upload.

  • 29 months ago
  • 1 point

FINALLY got the other pictures to upload. The original file sizes were too large :(

  • 29 months ago
  • 2 points

Just Stunning. Love the total effect.

  • 29 months ago
  • 1 point

Thanks so much! :D

  • 29 months ago
  • 2 points

Where can I buy one?

  • 29 months ago
  • 1 point

There are still some on Newegg. The gold and black version is limited to 500 units. At some point, there will be blue/white and green/black models released.

  • 29 months ago
  • 2 points

Should separate your gpu of the cpu for better performances for the temperatures Oh impressive construction :-)

  • 29 months ago
  • 2 points

Thanks! :D

We considered doing that, however, it's currently running cool and silent. We really liked the design layout, so we stuck to that rather than try and squeeze out another couple FPS. The client is only gaming on it, so it won't have much impact.

We'll have an update to another build of ours probably around summer. You'll actually see the CPU and GPU's split on that one.

  • 27 months ago
  • 2 points

Well done ,awesome build!

  • 27 months ago
  • 2 points

Thanks so much!

  • 29 months ago
  • 2 points

What a beauty!

  • 29 months ago
  • 1 point

Thanks so much! :)

  • 29 months ago
  • 2 points

amazing! 1+!

  • 29 months ago
  • 1 point

Thanks a lot! :D

  • 29 months ago
  • 2 points

you are welcome!

  • 29 months ago
  • 2 points

Rev up the engines we are flying this biplane

  • 29 months ago
  • 2 points

How much for that jappanese b*stard bought this state-of-the-art-system man?

  • 29 months ago
  • 1 point

Cost of parts was about the same as what PCPartPicker is showing. Shipping was around $500. Labor varies per machine, but it wasn't too bad for this build.

  • 29 months ago
  • 2 points

So this is what Perfection look like. I love it!

  • 29 months ago
  • 1 point

Thanks so much! :D

  • 29 months ago
  • 2 points

wow! look sweet! have u try passmark? what score?

  • 29 months ago
  • 1 point

Thanks! And no, sorry. We ran 3D Mark and a couple games with built in benchmarks. I don't remember what scores we got though. Then we stress tested stability.

  • 29 months ago
  • 2 points

Sick build! Why the two res/pump combos for one loop? Plans on making the cpu seperate?

  • 29 months ago
  • 1 point

Thanks a lot! :)

Actually, we went with dual pump/res combos because we prefer the redundancy and backup of two pumps, the lower speeds needed so the pumps can be quieter, and aesthetics. We felt two reservoirs keep the flow of the parallel scheme and filled out the side of the case better than a single res.

  • 29 months ago
  • 2 points

How do you have your video cards setup - the 5820 only has 28 pcie lanes so you must have one of your cards set at x8 instead of x16 correct?

  • 29 months ago
  • 1 point

Correct. We did a little research and couldn't find any information saying that x8 lanes would bottleneck the 1080, so we chose that instead of the 5930K.