Description

CPU: Ryzen 7 1700x at 3.8Ghz on all cores. I was able to get 4.0Ghz, but was not able to maintain this frequency while stress testing, so this is where I settled. Which is fine for me.

CPU Cooler: Bykski AM4 acrylic CPU block, Bykski Reservoir, Bykski d5 pump, Barrow 45mm thick 360mm radiator, Barrow 1/2"ID 3/4"OD v3 fittings-drain plug-and Alphacool 45degree angled fittings. Primochill sx uv green coolant.

Motherboard: Asus Strix x370-f Gaming

Ram: Crucial Ballistix Sport 2400, 32GB

GPU: EVGA GTX 1080Ti SC Black Edition

Storage: 2x Sandisk Ultra II 480GB SSD's, 960GB Total Storage

OS: Windows 10 Pro 64bit

Monitor: Crossover 3412UM 34" 21:9, 3440x1440, 100Hz Monitor

Headset: Gamdias HEBE E1 RGB

Wifi Card: Rosewill Dual Band AC1300 PCI-E Network Card

PSU: Cougar 1000w 80+ Bronze

Chair: Clutch Chairz: Throttle Series, White (A gift from my best friend and Cloud9 professional gamer: Iam_chappie) #creamteam

Case: Corsair Air 540

Cables: Kobra Cables, Red

Speakers: Logitech Z906 500w

Keyboard: Razor Blackwidow Chroma v1

Mouse: Corsair M65

Comments

  • 25 months ago
  • 3 points

hay that's pretty good.

  • 25 months ago
  • 3 points

+1 Could have at least some description about other points (Building the PC, experience, troubles, the best of the build, etc...), other than hardware and other stuff.

  • 25 months ago
  • 1 point

I'll get it up tonight. Wanted to put some time and thought into it so it is coming.

  • 25 months ago
  • 2 points

Ok :) So it was planned after all. Take your time man, i didn't had the intention to rush you with that XD

  • 25 months ago
  • 1 point

NO PROBLEMS AT ALL!

  • 25 months ago
  • 3 points

I have so much respect for you custom water cooled people...I considered it, but backed off because I figured I would screw it up. Looks great cheers.

  • 25 months ago
  • 3 points

What about the other GPU 6 pin?

  • 25 months ago
  • 1 point

you guys never miss a beat, lol. I didn't hook it up in all the photos I took while building it because all of the other braided cables that I own are all 8 pin connectors, and I just wanted uniformity in the photos. That said, this build is far from complete, just complete enough that I can start to enjoy it. I'm probably going to be adding hard tubing and alternate fittings (just waiting for more aluminum parts to hit the market), RGB fans, light strips, and probably a new set of sleeved cables in green and black. I will likely opt for some nice tridentz RGB ram to complete the system.

  • 25 months ago
  • 3 points

Ryzen 1700X + EVGA GTX 1080Ti + ULTRA WIDE= AMAZING

  • 25 months ago
  • 2 points

So how is the monitor?

  • 25 months ago
  • 1 point

In combination w/ the 1080Ti, it's my favorite component of the build. Coming from a 60Hz 4k panel, I REALLY like the monitor.

  • 25 months ago
  • 2 points

Have you been able to look at the Acer and Asus ultrawides, if so how does it compare to those?

  • 25 months ago
  • 1 point

Most of those are curved, which I kinda wanted but opted to save a little $$ by going with the flat screen, but other than that, I literally don't think there is any difference (unless you're looking at the G-Sync equipped monitors). I wanted G-Sync but settled for this because I just couldn't have it with everything else I wanted, on my budget. I guess that's how life works tho lol.

  • 25 months ago
  • 2 points

I envy you XD may it last you a long time!

  • 25 months ago
  • 2 points

the tubing looks soo cool nice build and great choice with the cpu!

  • 25 months ago
  • 1 point

Thanks. I'm probably going to go with a different cooling setup sometime in the future and incorporate hard tubing into that. But I'm happy with how it turned out, for what it is.

  • 24 months ago
  • 2 points

finally a build with this motherboard. good job:)

  • 24 months ago
  • 2 points

Great build Man ! How good is that motherboard ? Overclocking the ram was easy ? How about the can speed control and led control ? Sorry for asking, but I am considering this motherboard for my build that I am currently assembling :)

  • 24 months ago
  • 1 point

I'm very happy with the board. I'm use to Asus' higher end boards and this one is lacking a few features I wish it included, but I've been very happy with this board and have no regrets with my purchase. The BIOS layout is very familiar to me because it's almost identical to the BIOS on those other boards I have used and contains control options for everything you could want. It's very intuitive. The memory support or of the box is great, but there's already one bios update which I always recommend when building a new system. I say pull the trigger. It's a great board.

  • 24 months ago
  • 2 points

Very nice build! Could I use the ek-ekoolant pastel in this kit or no?

  • 20 months ago
  • 1 point

no, you couldn't. I got rid of that kit because I had TWO different units and both sprung leaks within, like, a week of installation.

  • 20 months ago
  • 1 point

It was a great performer for the money, but after that experience and being out a pc for months at time between the two units and waiting for replacement parts and bla bla, I decided to go legit and piece together the components and build my own custom loop. Super happy I did, but after doing it, I appreciate AIO coolers allot more lol.

  • 20 months ago
  • 1 point

Idk if I answered you back, but no, the pastels won't work in the A240 kit :-\

  • 20 months ago
  • 2 points

That's a badass build !

  • 20 months ago
  • 2 points

Thanks, it was fun to build! Lol, I love pcs.

  • 12 months ago
  • 1 point

dream build :P

[comment deleted by staff]
  • 25 months ago
  • 1 point

which I obviously do, or else I would have gone simple and cut the tubing to length. . .

  • 25 months ago
  • 0 points

I want to do hard tubing in the near future tho