Description

My husband convinced me to build a PC after I started experiencing some frustration with the refurbished pre-built ASUS computer that I bought in 2013. After researching for five or six months (and waiting for prices to drop on some parts), I ultimately decided on some pretty common and well-reviewed parts. I bought everything with photo editing and light gaming in mind.

Intel i7-8700k: I debated between this and the Ryzen 7 2700x, but ultimately decided on the processor based on my past experiences.

be quiet! Dark Rock 4: The instructions were terrible, but I eventually figured it out. So far, it has been plenty quiet and cool enough. I don't plan on overclocking or anything anytime soon though. I also really like how it looks.

Asus ROG Strix Z370-I: This motherboard is small, obviously, so that made plugging things in hilarious at times, but it was one of the only motherboards that had a USB-C slot, which will be great for many of the external hard drives I use with my current MacBook Pro. So far, wireless and bluetooth seem to be pretty good, which was also important to me.

RAM, M.2 SSD, and other SSD: These are great for what I need for photo editing. Everything is super speedy for any editing that I do. While this is not a ton of internal storage, I use external hard drives pretty regularly for redundancy.

EVGA GeForce GTX 1070 ti: This is super overkill for anything that I need, but I got a really great deal on it from B&H Photo before they started charging taxes. I originally planned to keep using my GTX 750ti, but I upgraded my monitor to a 4k monitor with HDR and I wanted my graphics card to be able to handle that. I've been able to play GTA V 4k with normal & very good settings at 60 fps, which is a fun bonus. Typically, I really just play the Sims 4 though.

LG 27UK600 - The part list lists the 27UK650, but I actually purchased the 600 model from Best Buy which is identical according to LG, but does not have an adjustable stand. This wasn't a problem at all as I have a monitor arm. This monitor is beautiful and I got it on sale, so I am very happy. Color accuracy also seems good and works great with my MacBook Pro with a USB-C to HDMI cable.

Originally, I purchased the NZXT 400i case, however, this was larger than it needed to be, so I purchased the 200i. I'm much happier with the smaller case. The cooling does not seem to be any different at all and the noise remains to be very very reasonable. Cable management on the 200i turned out to actually be easier with my parts. I'm not 100% happy with all of the power cables at the bottom of the computer, but it's also not a huge priority to me to make sure unseen parts are meticulous and delightful.

Overall, I've built a quiet, powerful, small, and stylish computer. While hardly a budget build, I feel that the overall value is great and this computer should last me a very long time.

Edited to include home-made custom GPU Back plate! I originally ordered a back plate that was much too thick and did not fit in my build. I designed the leaf design myself, cut out the design with my Cricut Explore Air 2, and applied the permanent vinyl adhesive to the acrylic plastic. Using very very small adhesive magnets, the back plate is easy to remove whenever needed.

Comments

  • 7 months ago
  • 4 points

Very nice color scheme. Amazing RAM clearance ;)

  • 7 months ago
  • 1 point

Thank you! When I was attaching the heatsink I was very anxious, but thankfully it worked out!

  • 7 months ago
  • 3 points

Nice build and setup, great job !

  • 7 months ago
  • 1 point

Thank you!

  • 7 months ago
  • 3 points

I want your setup very badly

  • 7 months ago
  • 3 points

Great job I can see why you like the Dark Rock, looks great in your PC through the tempered glass.

  • 7 months ago
  • 2 points

love the minimalistic style, +1

only suggestion would be to get a gpu backplate

  • 7 months ago
  • 1 point

I bought a custom glossy white one from JMMods, but it was too thick and would not fit. The motherboard sticks out just above the GPU so there is like half a cm of clearance. I was bummed.

  • 7 months ago
  • 2 points

You could try making your own with some 3mm acrylic if that would fit

https://www.youtube.com/watch?v=MBwfBCW9qZU ive used this video in the past to make my own backplate and its very helpful

  • 7 months ago
  • 2 points

Awesome idea! Thank you for the link, I may give that a try!

  • 3 months ago
  • 1 point

I just wanted to reply that I took your suggestion and made my own backplate. I think that it looks much more finished now.

  • 7 months ago
  • 2 points

Wow. Very nice looking build, +1.

I really like how it's all really clean and minimalistic. Also great black/and white contrast.

Can I ask you how noisy does the setup get? I'm thinking to do a similar one (case, cooler and CPU), when I'll have the money haha.

Thank you for sharing!

  • 7 months ago
  • 2 points

Thank you! Keeping it simple and clean was my goal.

It's a very quiet machine. I keep it right next to my monitor on my desktop and I can't hear it. When the GPU is pushed, I can hear the GPU, but not really the other fans. I don't often push anything and I do have it all in silent mode opposed to performance mode. Even when it's cranking it's still not loud.

  • 5 months ago
  • 2 points

This is the one H200 build that keeps me coming back to this case...It's still a close tie between the Lian Li O11 and this. Love this build.

  • 3 months ago
  • 2 points

Great work dude!

  • 7 months ago
  • 1 point

Really nice build, I love how neat it is, being a small form factor and all. On a related note, may I ask where you got your desk?

  • 7 months ago
  • 1 point

Thanks :) the desk is an ikea countertop with legs and Alex drawers. I believe it is the 74” Karlsby countertop. The legs and drawers were also purchased at ikea, just to be clear.

  • 7 months ago
  • 1 point

Really nice, clean build! Compact with great cable management and my favourite CPU cooler. Really good job! Only question is the front 2 fans appear to me in the photos as oriented for exhaust while the cpu cooler looks to be pulling air in the normal direction to exhaust from the rear? If that’s the case then both sets of fans could be potentially starving each other of air flow and running your system at slightly higher temps?

  • 7 months ago
  • 2 points

Thanks! The fans were a last minute edition when I switched from the H400i to the H200i and I'll be completely honest when I say I had no idea which way to point them. I searched it and attempted to figure it out, but I had a really hard time figuring out which is best and many people put radiators for liquid cooler in the front, so I wasn't sure it was the same if there isn't a radiator. My plan all along was to put it in as you see it now and monitor things carefully whenever I'm doing anything intensive. It's good to know that it may be better another way though. I couldn't figure that out for the life of me.

  • 7 months ago
  • 2 points

Yeah they’re set to exhaust from the case, essentially the way you’re set up is all you’re fans are taking the air in the case and venting it, the difference in pressure from the ambient room is pulling air in through any vents on the case.

Setting the fans at the front on the other orientation will bring in cool air from the room, the fan on the cpu cooler will pull this air through the fins and then the rear fan will exhaust the hot air. Should bring your temps down, but if you’re not doing anything intensive the only real time they’ll actually increase is if you’re gaming - always better to run at lower temps though!

  • 7 months ago
  • 3 points

Seriously, thank you very much for the explanation :)

  • 7 months ago
  • 2 points

No problem, enjoy!

  • 7 months ago
  • 1 point

Nice, Clean, Smart. Excellent job!

  • 7 months ago
  • 1 point

Very clean.

Your cases shroud comes awfully close to your 1070ti.

  • 7 months ago
  • 1 point

Very nice and clean job! We have similar H200i machines :)

  • 7 months ago
  • 1 point

We do! I probably used your case as inspiration at some point, I'm sure. I really like your cable management!

  • 7 months ago
  • 1 point

Oh, thank you! I'm glad to hear that :) One tip: you can very easily install a macOS on this PC if you want it in the future ;) Cheers!

  • 7 months ago
  • 1 point

Hey, super clean build! I plan on doing something similar soon. I have one pointer, though! You should flip the radiator and/or fans so that the front fans are facing the other way around. You could put the radiator towards the inside of the case and the fans with the blades facing the front of the case, or just flip the fans where they are now (although this doesn't look as nice as having the radiator there). It looks like the rest of your fans are facing the right way, however!

Again, this is a really nice build. The color scheme works really well and gives me some inspiration for when I use this case.

  • 7 months ago
  • 2 points

Thank you! I plan to do this when I install a backplate on my GPU. I really like this case and I'm sure you'll end up enjoying it as well!

  • 6 months ago
  • 1 point

how satisfied are you with Bose Companion 2 III?

  • 6 months ago
  • 1 point

Sorry for the delay. As far as $100 computer speakers go, I'm very happy with the sound. There are no fancy bells or whistles to them (no bluetooth, wireless anything). I like that I do not need a sub anywhere, but still get to experience pretty decent bass. They also are not obnoxious to look at and they don't take up too much space.

  • 6 months ago
  • 1 point

no problem and thank you for answers. I know everything about this speakers but I don't have an opportunity to hear them. I plan to buy this Bose for my gf. she also has h200i case but also has a very small desk and I believe to this speakers will be a great choice. thanks again and sorry for english :)

  • 3 months ago
  • 1 point

You had to remove the case fan next to the DR4 CPU cooler, right? Cause I am building something similar with the same case and cooler, and it simply doesn't fit with the fan there.

https://twitter.com/ArtemR/status/1101638756698710016

  • 3 months ago
  • 1 point

Sorry for the delayed reply. I was able to install my DR4 CPU cooler without removing the case fan directly above it. There is enough clearance that they are not touching. I do recall having an initial issue with installing the DR4 in which I installed the base that supports the heat sink horizontally instead of vertically or something and I had to unscrew and put it back in place to have clearance for both RAM and the fans. The instructions were obnoxiously difficult in that regard.

  • 7 months ago
  • 0 points

The 8700K is the hottest mainstream CPU to date...m

  • 7 months ago
  • 1 point

What?! Lmao

  • 7 months ago
  • 0 points

I mean obviously the 8700k emits a constant 110C if you do not delid and that is clearly without any overclocks and with its turbo boost off, duh.

Sarcasm intensifies

  • 7 months ago
  • 1 point
  • 7 months ago
  • 0 points

What? It's infamous for running hot

She wanted to a quiet and cool running CPU- 2700X would've been a wayyy better choice. Especially because it's for photo editing

  • 7 months ago
  • 1 point

Cool running? At it's max clock it's hitting the same temps an 8700k when it's clocking about 4.7... And that's it they both have the same coolers. Yeah the 2700x generally runs cooler because it runs much slower. Bring up the speed on it's stock cooler and watch the temps fly

  • 5 months ago
  • 1 point

Hi, sorry for replying so late. Well, you can't really compare stock cooler temps. The 8700K doesn't have a stock cooler, and if you were to put on a normal Intel stock cooler, it would throttle a LOT