Description

Work in progress... HDD + New cpu cooler coming soon...

The other changes i made from the bios beside changing the ram frequency are:

  • custom qfan profiles with 20 sec offsets for the dual corsair case fans, silent for the 2 phanteks ones and turbo for the cpu stock cooler
  • enabled erp to s4+s5

A "problem" that I've encountered is related to my gigabyte 1060. The gfx card has a fan stop feature that stops the fans once the temperature goes below 50°C. Sometimes, one of the fans doesn't stop. Sometimes the same fan increases it's rpm just a little bit for 1 second, before going back to its 200 rpm or something like that, while the other fan it's off and it does this over and over again... Sometimes the 2nd fan doesn't stop. Sometimes they both stop and start like they should. I thought it was an AORUS GRAPHICS ENGINE PROBLEM, so i have reinstalled it. I though msi afterburner would influence somewhow, so i uninstalled it(even though i never unabled anything in there beside the in-game info monitor). My next solution could be updating the bios, but before i do that I would like to know if someone has a better idea, since I know it's a bit risky doing the update...

Edit: The temporary fix I've found to the gfx card problem is to click the "semi passive" button twice(from Aorus graphics engine) and this will make the 2nd fan to stop. This leads me to the conclusion that this is just a software related matter and the gfx card works just fine...

Comments

  • 19 months ago
  • 2 points

Oh boy this is a very hot looking pc

  • 19 months ago
  • 1 point

Thank you :D

  • 19 months ago
  • 2 points

No problem

  • 19 months ago
  • 1 point

Make sure the header is oriented the correct way. The pin layout isn't symmetrical so you could be pushing a piece of plastic onto a pin.

  • 19 months ago
  • 1 point

Thanks for the reply, but that's not the case.

  • 19 months ago
  • 1 point

Double check the pins are not bent or deformed. I would also check for anything in the hd audio plug as well. Ive been through the same ordeal with mine before and a single pin ended up being bent in the wrong direction and i had to look closely to even notice.

  • 19 months ago
  • 1 point

Nothing is bendend :-)

  • 18 months ago
  • 1 point

What's the problem with the HD audio?

  • 19 months ago
  • 0 points

Weird issue with the header? What's happening exactly? you line it up correctly there should be a tab on one side from memory. Also double check your not trying to put it into a usb 2.0 header they can look similar sometimes. Unless its specifically an issue with the Phanteks header I cant help you. Inspect the plug see if it has rubbed somewhere on the header plug and you could always try filing it down but hard to say without pics. Good luck let us know how you go.

  • 19 months ago
  • 0 points

Dude, are you serious? I build an entire pc by myself. Do you really think I could mess up a simple thing like this? Thanks for your concern, but i was hopping for a different solution. The header enters perfectly half way, but then it stops like there is something that blocks its way in. Visually, everything looks fine ... Doesn't matter too much though because at the moment i'm just using my usb headset.

  • 19 months ago
  • 1 point

No offence intended good luck

  • 19 months ago
  • 1 point

BiG eGo jk

  • 19 months ago
  • 1 point

Ego has nothing to do with it. It's just I do not like getting trolled :P

  • 19 months ago
  • 1 point

Lol ok sry :(

  • 19 months ago
  • 0 points

Rear audio port should still work fine even if you can't get the front audio header to work :)

  • 19 months ago
  • 0 points

Can you post a pic of the front panel header (mobo pins and case cable for front panel audio)? That might help people to be able to point you in the right direction.