Haven't built a $1000 PC since a PII 233MHz system in 2000. Not really going to overclock too hard as the EVO and Haswell will prevent craziness but 4.2 GHz seems ok @ 1.208v, room temp was 32 degrees. Going to recommend he get some of the sleeved power cable extensions to make it look nice. Took an 120mm internal case fan and turned it into a push fan for the EVO since it has a 2000+ RPM speed and very high 4 HgO/mm+ static pressure. Two Air Flow 140mm on the front and the side. The 410 is a wonderful case my gosh plenty of room in the back, fan controller, holes for wires. option to remove middle cage (which I did). Considering I never spent more than $30 for a case I think I will reevaluate that stance after seeing these modern cases. Last picture is the updated final with the computer running, moved the middle HDD cage took the fan from there and put in on the EVO. Going to move the side case fan wire to underneath the lower HDD as a final act.