Description

EDIT: So happy to be re-featured! Thank you so much PCPP!!! EDIT 2: Added more photos, this time of the rig turned off

Hi guys! I finally completed the build about a week ago and I couldn't be happier. This is my first ever water cooling project and it couldn't have been any more daunting to do it with hard line brass tubes on the first run. Needless to say, the way the brass pipes look with the RGB lighting came out exactly the way I'd envisioned.

I had originally wanted to collaborate with a local modder but the itch to learn and do things on my own was too great that I'd spent hours between shopping for parts and watching instructional Youtube videos. I ended up buying from different retailers like Performance-PCs, PrimoChill, EK and even going so far as ordering parts from AliExpress. I had my fair share of (forgivable) mistakes like buying push-in fittings, and buying too many extra fittings etc. But all that, I charge to experience. I'm in the process of planning my 2nd watercooled build and am practicing pipe-bending etc.

Anyway, what you have here is a PC that nods to the Game of Thrones fan inside me. Dracarys is High Valyrian for Dragonfire and this is what this PC is. It looks like a furnace burning hot with Dragonfire, forging molten Valyrian steel into weapons to use for the coming Winter. The shiny brass tubes are a tease to what the supposed weapons look like... hard, shiny, and just plain awesome. I made a gif to flash on the Livedash feature that says "Fire and Blood" and it just looks way too cool. Targaryens in the house, put your hands in the air! The Nighthawk RGB looks a bit like dragon wings, and the reservoirs are lit orange and filled with orange "molten steel" coolant.

The Threadripper system idles in the low 30's and peaks at around 75 degrees under full load with a 3.8Ghz overclock on 1.37v Vcore. Although I'm not sure if these are accurate or if threadripper has the same 20+ degree offset for Ryzen X processors. Regardless, I'm happy with my processor speeds and find no need in pushing for overclocks.

The Poseidon peaks at about 65 degrees on full load and reaches clocks of about 2025-2050mhz.

Hope you all like this build! Looking forward to sharing more in the future.

Comments

  • 20 months ago
  • 14 points

how does the 1920x 1080ti do at 1920x1080

  • 20 months ago
  • 3 points

We need to know.

  • 20 months ago
  • 1 point

Linus tried it. It was so bad that he didn't show the 1080p results (with a GTX1080)

  • 20 months ago
  • 2 points

I meant as a joke like 1920x 1080

  • 20 months ago
  • 2 points

LOL I knew it! =))

  • 20 months ago
  • 1 point

I know (:

  • 20 months ago
  • 1 point

Why was it so bad actually? Never really understood that cuz linus didnt explain **** in the video

  • 20 months ago
  • 1 point

lol

  • 20 months ago
  • 4 points

Pumpkin Spice PC

  • 20 months ago
  • 2 points

Where's the blood?

+1

  • 20 months ago
  • 4 points

I guess I should've cut myself in making this build and wiped the blood on the case. LOL!

  • 19 months ago
  • 3 points

My first PC build, I did this. Not intentionally but I got my hand on a heatsink and dripped blood on the mobo. I thought about it for a minute and was like... meh, I am not cleaning that.

  • 3 months ago
  • 1 point

what the ****

  • 20 months ago
  • 2 points

dang

  • 20 months ago
  • 2 points

Nice Build +1 but your monitor set seriously made me get a headache :-)

  • 20 months ago
  • 2 points

man..that is beautiful

  • 20 months ago
  • 2 points

valar morghulis

;) Epic build my dude!

  • 20 months ago
  • 2 points

DAYUMMMMMM can't believe I haven't seen this yet!! Two words:BAD ***

  • 18 months ago
  • 2 points

grabeng build to! ninong pahingi pamasko!!haha. Good job on this awesome threadripper build! #teamred

  • 18 months ago
  • 1 point

hahaha thank you pare! :D

  • 20 months ago
  • 1 point

Very nice. I am such a sucker for brass, I regret that I have but one +1 to give.

  • 20 months ago
  • 1 point

Me too, knew that I had to do it as soon as I saw a brass build!

  • 20 months ago
  • 1 point

Awesome job! I hope someday I can doing something like this.

  • 20 months ago
  • 1 point

Very nice job bud! Love those water res, always feel like wanting to use them. Great choice of parts and love the case.

Those water temps on the GPU seem pretty warm though.

  • 20 months ago
  • 1 point

hmm I'm not sure. I think it's pretty fine since I'm using a single 360 to cool 2 components, while on an overclock. Haven't had the chance to test it out on its own. Pretty far, still, from the 80's on air at least!

Thanks, they're pretty cool reservoirs with LED slots on them.

  • 20 months ago
  • 1 point

if you went with the WGX version of the case, you could have 3 360 radiators :)

+1 INB4FEATURE

  • 20 months ago
  • 2 points

CALLED IT

  • 20 months ago
  • 1 point

yup! Had no way of getting the case here. I actually waited 30 days to get the case as it was ordered by a local retailed from Lian Li themselves. The folks at Lian Li said it would've taken til Oct 31 (this was back in mid-August) to manufacture the case and get it here. I guess they shipped all their stock out back to retailers elsewhere. Couldn't wait the full 75 days so I opted for the WX

  • 20 months ago
  • 1 point

Amazing build!!

The RAM on both sides just makes it! And the dragon logos!

My Viserion build pales in comparison lol.

https://ca.pcpartpicker.com/b/YbkdnQ

  • 20 months ago
  • 2 points

Right?? Love the Ice build on Viserion though. That was one of the possible themes when I was planning this build. That and Nymeria-wolf-ish theme. Ended up with the fire and blood one though.

  • 20 months ago
  • 1 point

Thanks! I think fire and blood turned out menacingly perfect for you. Wolf wouldn't have been as aggressive as this one. Nice photos too!

  • 20 months ago
  • 1 point

This build is pretty spooky, in a good way

  • 20 months ago
  • 1 point

I normally dislike RGB, but that color is fantastic! Great photography too!

  • 20 months ago
  • 1 point

Awesome build! Interesting to see how different our builds turned out while using almost the same parts. <3

  • 20 months ago
  • 1 point

I know man! I saw your feature and I was like... WOAH! And I was in the process of waiting for all my stuff at the time too!

  • 20 months ago
  • 1 point

mildly adequate

  • 20 months ago
  • 1 point

saw this on a filipino pc shop page are u filipino?

  • 20 months ago
  • 1 point

YUUUUUP!!!! I think PCHub shared it.

  • 20 months ago
  • 1 point

NICE!! Good to see a fellow filipino here

  • 20 months ago
  • 1 point

I love this build!!

The lights off the build and chrome make it all look bronze/copper and gives it a bit of steam punk look. Great fluidity going on!!

Did that case have a vertical mount setup or is that a mod you did? I love vertical gpu's and modded both my pc's with a vertical mount bracket mod.

Congrats on the feature!!

  • 20 months ago
  • 1 point

Lian Li includes it with the PC-O11WGX and sells them separately with the PC-O11WX and WW versions.

Thanks for the praise, means a lot! :D

  • 20 months ago
  • 1 point

Makes me feel nice and cosy. Sick build wish I had the talent to build PCs like that, too scared to attempt hard-line watercooling xDD

  • 20 months ago
  • 1 point

NICE BUILD!!!! Looks absolutely amazing!!How is the memory compared to a G.Skill?

  • 20 months ago
  • 1 point

The Nighthawk has a really wide heatsink. Other than that, the XMP profile works just fine. The RGB effects works as well as any other, so for me, it's more an aesthetic and size compatibility question. For my needs and my theme, this RAM was perfect. I used to own the TridentZ's and would go with them if the theme and build was more fit for it, but in this case, the Nighthawk was the clear winner.

  • 20 months ago
  • 1 point

Those temps do seem a little high on the GPU. I have an Asus Strix 1080 and i never exceed 50C even with a 2066 mhz core clock dialed in at 50% fan curve.

Water should be keeping that card around 40. I wonder why its high.

  • 20 months ago
  • 1 point

I didn't realize how gigantic that Threadripper box is! That build is pretty sweet though!

  • 20 months ago
  • 1 point

was the brass hard to bend is that why there is so many angle fittings?

  • 20 months ago
  • 1 point

Brass pipes are unbendable. Chrome pipes that are bent are usually painted copper. If you try bending these pipes the chrome plating will chip off.

  • 19 months ago
  • 1 point

did your memory OC easily?

  • 19 months ago
  • 1 point

hmm, just used to 3200mhz setting on the BIOS. seems to be working smoothly. :)

  • 18 months ago
  • 1 point

Please compare the headphones with and without the amplifier.

  • 15 months ago
  • 1 point

what does you use this beast for??

  • 14 months ago
  • 1 point

the metal tubing right next to the 1080 ti is not even and seems slanted and totally ruining your astonishing build, just asking if it was the image or angle because it looks so uneven. (12th image, bottom right side)

  • 13 months ago
  • 1 point

This is one of the nicest looking builds I’ve ever seen. This is straight up pc ***********. Not only is this sexy, but it’s also so unique. The white, black and gold creates a nice, warm and calming effect. Excellent job!

  • 12 months ago
  • 1 point

How is the GPU plugged in, i see no rider cable?

  • 12 months ago
  • 1 point

hmm it's in there somewhere ;)

  • 8 months ago
  • 1 point

When you have too much spare cash...

[comment deleted]
[comment deleted by staff]
  • 20 months ago
  • 1 point

Thanks

[comment deleted by staff]