Description

Made minor updates to this build. Changed the SLI bridge and finally got the 24 pin motherboard cable to look the way I want. Also the power LED for the case is now working, woo-hoo!

Comments

  • 31 months ago
  • 3 points

I know that you wanted to show such an amazing cable work but its a shame that you put that sexy beast on the disco carpet floor

  • 31 months ago
  • 2 points

Yeah my apartment sucks.

  • 31 months ago
  • 1 point

At least the psu is facing the right way considering the carpeting.

  • 31 months ago
  • 3 points

only sad thing is such a beautiful thing has to live on the floor. nice build mate!

  • 31 months ago
  • 2 points

Just amazing <3

  • 31 months ago
  • 2 points

Stunning =D

  • 31 months ago
  • 2 points

i have the same case with the same fans. They are the best :) If youre going for all out RGB try getting a long loop of a strip between the metal panel and the dust filter, it creates an awesome effect but you'll have to unscrew the white piece that surrounds the front power LED.

  • 31 months ago
  • 2 points

Ridiculously clean AF! +1

  • 30 months ago
  • 1 point

Thank you.

  • 31 months ago
  • 1 point

Very colorful build! Well done!

Only suggestion is that if you are going to leave it on the carpet, put something like a wood board or something underneath it otherwise the PSU is going to suck in all the carpet hairs.

+1

  • 31 months ago
  • 1 point

More pics on the inside please!!

that cable management's got my pants down!

  • 31 months ago
  • 1 point

May I ask what monitor is shown?

  • 31 months ago
  • 1 point

I wonder about the same.. that's not a monitor - that's a beast!

  • 31 months ago
  • 1 point

I guess me might never find out.

  • 30 months ago
  • 1 point

**** so sorry just saw this. It's the LG 34UC88-B.

  • 31 months ago
  • 1 point

Hey dude, how did you manage to fit Kraken X62 radiator into the case??? Did you remove the dust filter in the front to fit the radiator in? Or is the radiator size just about the case available space. Let me know! Thanks

  • 31 months ago
  • 2 points

I didn't have to remove anything to make it fit. If you want the same setup as mine just do this: Take out the front panel and Dust filter. Align the rad with the bracket from outside and mount your fans through the inside of the case to the rad. So the screws will go through your fan and the bracket and mount into your rad. Then you can just put the filter and front panel back on as usual. Hope that helps.

  • 31 months ago
  • 1 point

Thanks a lot. Will do that :) I'll upload my final upgrades and link to you!

  • 31 months ago
  • 1 point

No problem, sounds good. Good luck!

  • 30 months ago
  • 1 point

Looking at the build I'm doing the same case and cooler what configuration are the fans. Are they push or pull?

  • 30 months ago
  • 1 point

The fans in the front are pull and the top and back are push. Hot air rises and everyone recommends pulling cold air through the front.

  • 30 months ago
  • 1 point

Aren't you worried about negative pressure in the case?

  • 30 months ago
  • 1 point

did the x62 cooler bolt up with no problems in the front? I heard some people have troubles with the bolts not lining up on the corsair h115 which is also a 180mm cooler. I have one on order..

  • 30 months ago
  • 1 point

If you check the comment history on this build you'll find the workaround I posted. Let me know if you still need help. Or better yet if you can cancel and get the 240mm version instead, it would save you a lot of trouble.

  • 30 months ago
  • 1 point

too late, its already here.. lol seems like it's not too hard to get it to fit... thanks for your help!

  • 30 months ago
  • 1 point

Awesome. You're a smarter man than I for sure. I had to tinker with that thing for 2 hours before I figured it out, lol. Be sure to link me to your build.

[comment deleted by staff]