Description

Decided to downsize (hahahaha) to a Corsair 350D mATX case, and try my hand at some (albeit AIO) watercooling. This includes the Corsair H110 for my CPU, and the Antec Kuhler 620 for my GPU. Pics are attached (some before attaching the cooler to my GPU, some after), let me know what you think!

Comments

  • 76 months ago
  • 13 points

Clever.

  • 76 months ago
  • 9 points

I try

  • 76 months ago
  • 9 points

wow - have you got a hater or something? some idiot has just downvoted my comment, your reply... possibly all the comments on the build judging by how many "0 points" entries just appeared. Weird.

If my comment was at all ambiguous, it wasn't meant to be sarcastic. Genuinely clever. :)

  • 76 months ago
  • 9 points

I'll be rolling out some anti-spam measures for aggressive downvoters soon. There have been a few people who have been quite "active", if you will. That'll restore karma scores for quite a few people.

  • 76 months ago
  • 4 points

Good news. Thanks as ever Philip, look forward to seeing a little boost to my score! :)

  • 76 months ago
  • 3 points

I saw it too. It doesn't really matter to me, but I'm glad you're doing something about it!

  • 46 months ago
  • 1 point

I know I am

  • 76 months ago
  • 6 points

1600 memory wouldn't of hurted ur pocket too much.. but overall, good job

  • 76 months ago
  • 8 points

he can just overclock the ram to 1600.

  • 76 months ago
  • 2 points

This is awesome (the mod especially)....Also, great cable management!

  • 76 months ago
  • 1 point

Thanks! I've since reworked it to be even neater with the introduction of a fan controller.

  • 76 months ago
  • 1 point

Awesome build and great mod :) I love the 350d corsair case and you did a great job filling it up.

NICE WORK!

  • 76 months ago
  • 1 point

I was looking forward to this case for ages. I actually got it the day it was released at NCIX, but I never new that you could upload your rig here!

  • 76 months ago
  • 1 point

Where did you get the kuhler for $30?

  • 76 months ago
  • 1 point

Reddit /r/hardwareswap

  • 76 months ago
  • 1 point

Nice build! Very clever mod indeed, though doesn't that void the warranty on the card? Also, why the slow RAM? It's a pretty nice build for the price! Cheers

  • 76 months ago
  • 2 points

It was just RAM I already had, and I didn't think it was really worth dropping money on another set.

The mod doesn't void the warranty (for me). It's exactly the same as if you watercooled it with a regular universal waterblock. You should make sure of policies on watercooling with your card manufacturer

[comment deleted]
  • 76 months ago
  • 1 point

Ah man when you said 280 I thought this was going to be a custom watercooled 350d.

  • 76 months ago
  • 1 point

I wish I had those funds, otherwise you wouldn't see an AIO cooler hooked up to my GPU.

  • 76 months ago
  • 1 point

Hmm, nice built seriously, but with the mod, how can you still get 65 degrees with the gpu? :P

  • 76 months ago
  • 1 point

Turns out my motherboard was regulating the pump speed to be very low, but now that I've got a fan controller, it actually tops out at 53C under full load overclocked.

  • 76 months ago
  • 1 point

That's very nice! good job dude

  • 76 months ago
  • 1 point

Thanks a lot! It's my first really real build and I'm definitely happy with how it turned out.

[comment deleted]
  • 75 months ago
  • 1 point

Isn't there a header on the GPU's PCB that regulates the stock cooling fan? Why didn't you plug the pump in there?

Also, I'm thinking of doing The Mod on my GTX 780, and I'm planning on using the zip-tie method to mount the pump. Do you think I could zip tie the fan to the VRMs? And iff I zip-tie the fan against the VRMs, could the fan frame melt?

Sorry for so many questions lol. Hard to find "The Mod" builds that are recent.

  • 76 months ago
  • 1 point

How did you get everything so cheap?

  • 76 months ago
  • 1 point

I bought every part minus the case used from either Overclock.net, Anandtech BBS, or Reddit's /r/hardwareswap. No problems with anything, and hopefully I don't run into anything down the line.

  • 76 months ago
  • 1 point

Smart and effective way to save money

  • 76 months ago
  • 1 point

Just wondering why you went for a 2500k? An ivy bridge or haswell would have been a better over clocker. Other than that I love this build, I would get the 350d for my next micro atx build.

  • 76 months ago
  • 2 points

I already had it from my previous build and didn't feel that it was necessary to upgrade. As you can tell, I try to keep my costs down.

  • 76 months ago
  • 1 point

Okay then, there is not much of an upgrade between 2500k, 3570k and the new 4670k that would warent that upgrade anyway! Great to see a matx build.

  • 76 months ago
  • 1 point

Was dying to the try the mod on my 6870, but decided to upgrade instead. Looks sharp and good job. Did you use one of DWood's brackets?

  • 76 months ago
  • 1 point

Yes I did!

  • 76 months ago
  • 1 point

man, the more i look the more i really dig the 350d. I have a 650d, but its somewhat dated. Time for an update Corsair :)

Anyway, me wants a 350d :)

  • 76 months ago
  • 1 point

It's definitely nice. I went to it from a 400R, and it's not too much smaller than the 400R. It's still very much a mid-tower, it's just a little bit smaller.

  • 76 months ago
  • 1 point

Pretty awesome to see "the mod" outside of OCN! Sick looking build man!

  • 76 months ago
  • 0 points

That's where I got the idea from!

  • 76 months ago
  • 1 point

Did you get the mod from TripT? How is the vram cooling working for you?

  • 76 months ago
  • 1 point

From what I can tell, my card had heatsinks on the VRMs already. Even if it doesn't, there was no thermal tape or anythign to indicate that they were being actively cooled by the shroud/heatsink, so the fan does just fine keeping them at around 65C under full load.

  • 76 months ago
  • 1 point

Nice. Is it the TripT mod?

  • 76 months ago
  • 1 point

Yes it is, sorry!

[comment deleted]
  • 76 months ago
  • 1 point

Did you use dwood's brackets? Or did you just perform "The Red Mod" with zip ties? Also it's called "The Mod" if you do it to Nvidia's gpus, if you do it to an AMD GPU it is called "The Red Mod."

  • 76 months ago
  • 0 points

Potato, potato (???)

I used one of Dwood's brackets. I wouldn't have minded zip ties, but there's no place to put a fan with zip ties!

  • 76 months ago
  • 1 point

Oh, yes, I didn't even think of that. Also you might as well show a little loyalty and call it "The Red Mod" eh? Up to you, but personally I don't see why the mod on a Nvidia card wasn't called "The Green Mod" but I didn't name either of them.

  • 76 months ago
  • 1 point

My loyalty is now shining brightly!

  • 76 months ago
  • 0 points

That's the spirit!

  • 76 months ago
  • 1 point

Very nic e system for the price.

  • 76 months ago
  • 1 point

Good part selection. Well build. And I love water-cooled GPUs. And since it's windowed, maybe you can add some interior lighting if you wanted to?

  • 76 months ago
  • 1 point

I'm trying to figure out the best way to do it. I don't know if the NZXT Hue will work since the 280mm rad partially blocks off the top drive bay. Do you have any suggestions?

  • 76 months ago
  • 1 point

For your case, not really.

  • 76 months ago
  • 1 point

I'll try and figure something out. Maybe an NZXT LED strip or something

  • 76 months ago
  • 1 point

So the exhaust of the GPU is going back INSIDE the case?

  • 76 months ago
  • 1 point

Is it? What am I doing wrong? Since it's my first build I don't know much about airflow and whatnot.

  • 76 months ago
  • 1 point

It depends how you have the fans set. I would look at the direction on the fan exhaust and that will tell you where the heat is going. Its kind of crazy to have the heat going back inside the case and its crazy to have the heat exhausting from the front panel. You can do it, but it kind of beats the point of liquid cooling.

Since the CPU radiator is on top of the case, I would do my best to move the radiator from the front of the case to the back. That way all heat exits the case keeping the insides nice and cool.

  • 76 months ago
  • 1 point

All case heat is leaving through the case exhaust. The front draws in cool air as does the top.

  • 76 months ago
  • 1 point

Nice mATX build. I'm actually planning on doing the same thing "downsizing" to mATX with this case. I currently have a Corsair C70 and don't need anything that big. Feels a bit clunky too!

  • 76 months ago
  • 1 point

Want to sell me one?

  • 74 months ago
  • 1 point

Whats your CPU temp under load?

  • 73 months ago
  • 1 point

would you have any problems installing the psu ? dont they have to be under a certain size ?

  • 50 months ago
  • 1 point

If I where to build this pc and didnt want the liquid cooling would it be better to spend more on the graphics card or more ram?

  • 44 months ago
  • 1 point

I have a question about the CPU I have recently bought the same CPU for my build even though it's older, the reviews still say it's a great cpu. How does it preform for you

[comment deleted]
  • 76 months ago
  • 1 point

Thanks!