Description

Silent gaming monster - all fans are set to 7xx RPM through fan controller

8/7 - Traded my EVGA 1080TI FE for one with an Hybrid Kit - 10/7 - Swapped the SF600 with an Corsair RM750x V2/2018 model - 11/7 - Swapped the CLC280 with a Cryorig H7 Quad Lumi

More pictures will come soon :)

Comments

  • 11 months ago
  • 1 point

is your CPU actually that cool under load? I run @ 4.8GHz but I get around 40c idle... Under load around 60-70c with the NZXT Kraken x52 AIO liquid cooler.

  • 11 months ago
  • 2 points

48c is the peak temp after 2 hours of intense 1440p 144hz gaming. And the Noctua fans only runs at 7xx RPM manually - no matter the temps. No fan curve.

You use auto volt, or manual? Core pll, and vcore voltages can increase temps with like 5-25c if they are just set on auto(depending on mobo, and OC settings) - i won like 15c by setting those two manual.

But the reason why we have such different peak temp is probably because i paid an engineer to delid it. Those money was better spend than any cooler you can buy ;)

  • 11 months ago
  • 1 point

Oh its delidded makes a bit more sense. I set the volt manually at 1.22 if I remember correct. 4.8GHz with an NZXT Kraken x52 AIO cooler. Idling at 38-40c right now lol.

  • 11 months ago
  • 1 point

yep after spending like 200$ on Corsair h100i v2, and Noctua Nh-D15, and still hitting 70-75c with NO OC(with manual volt at 1,2, and core pll at 1,0). I thought why not.. try spendin' 40$ on a delid

Which gave me a 16c peak temp difference, and lower, and more stable idle temps

I use to run it a 4,7 with a Cryorig H7, with a single Chromax fan on low rpm(700-800). Back then peak temp was around 55c

  • 11 months ago
  • 1 point

Can I have said card afterwards?

  • 11 months ago
  • 1 point

said card? what are you talking about??

  • 11 months ago
  • 1 point

The Founders edition card

  • 11 months ago
  • 1 point

But never mind

  • 11 months ago
  • 1 point

Said card = no meaning in English

  • 11 months ago
  • 1 point

Talk about a tight fit for the radiator at the front! Nice build. Though I wonder how you are going to get a water cooled video card in there, you may have to do away with the AIO and go with a customer water cooling loop. IIRC JayzTwoCents did a customer loop in that case which could serve as some inspiration.

https://www.youtube.com/watch?v=6VMtJEjiMxA

  • 11 months ago
  • 1 point

yeah had you remove the GPU to hit an angle so i could get it in there :D

Its no problem at all.. before the founders edition card i had 1080 Strix with Kraken g12, and after that a 1080 seahawk(both watercooled) in there. There is even room to run pull/push on radiator in top, or rear.. :)

Custom loop dont include warranty on leakage.. so that aint NEVER gonna happen even though i the best insurance on all my electronics :)

  • 11 months ago
  • 1 point

had to*

  • 11 months ago
  • 1 point

Where did you’ve got those beautiful cables??

  • 11 months ago
  • 1 point

From Corsair. Its their own sleeved cables. Cables combs is totally useless. But the cables is pretty decent :)

  • 11 months ago
  • 1 point

Thanks =)

  • 11 months ago
  • 1 point

Why did you switch out most of your components?

  • 11 months ago
  • 1 point

To make the build look more clean(tubes from 2 x aio = a mess)..

To get more performance(with the hybrid kit on the FE the card runs at 1898mhz, instead of 1600 - because of thermal limit, and i eliminated 2/3 of the noise from it).

And silence(the 135mm fan on the new PSU runs lower RPM to keep it cool, than the 92mm fan on the SFX PSU), + the Cryorig only has fan noise EVGA CLC had fan noise + pump noise

  • 11 months ago
  • 1 point

Ok quick question, if i want the Fe Blower Card but dont really care to be overclocking, will it still be a good card?

  • 11 months ago
  • 1 point

Not really IMO. Im not overclocking the card - but i dont wanna loose performance because the cooler ain't doing its job when i buy a 1000$ graphics card

Its loud, and at the same time you loose several % performance

ANY custom card with 2/3 fan card is better(you wont loose performance, its more quiet, and wont hit 84-85c within a few min) no matter the brand

  • 11 months ago
  • 1 point

That's what I saw from all the reviews of the blower style card. Every category seems to be better with an aftermarket Gpu. However I love the blower style gpu's and If I can comfortably control all temps while using it then I may still end up with the blower style gpu. So do you not recommend the Evga cpu cooler?

  • 11 months ago
  • 1 point

I dont understand if you mean the FE card's turbine, or the Hybrid kit?

  • 8 months ago
  • 1 point

Very nice. I am an ITX fan as i've built 2. Small but powerful right? But now I'm thinking of matx and maybe better air flow for gpu.

Question, I have the same psu but where did you get your cable kit? I only have 6+2 pins for the gpu, but yours looks like you have a 6 pin and 8 pin, is that right? Where'd you get the 6 pin?

  • 8 months ago
  • 1 point

Thank you - it's my first one. Wanted something smaller but didn't wanna change to many parts at once(only thing thad had to be changed for this build was motherboard) :)

I've changed the RAM to some Dominator Platinum - but haven't updated my photo's

I wouldnt call my Nano S small.. next case is gonna be Ncase, or Loque.. really looking forward to trying to build in those dimensions. But its gonna be a secondary build - to complicated to change my present parts to fit in one of those..

Cable kit is just standard Corsair from a Danish retailer.. its 2 x 8 pin, i just took the extra +2 pin and strapped it in with the cable soup in the back of the case so its not visible :)

  • 8 months ago
  • 1 point

Thats it? Great job hiding the extra 2 pins. Love the cryorig cooler you have. I thought it'd be too big for my itx but now I may get it. Again great job, damn sexy little monster you got.

  • 8 months ago
  • 1 point

Yup thats it. The extra 2pin is not attached at the end of the cable next to the 6 pin like on "regular" PSU cables. Its a solo wire coming out in the start of the cable.. so its very easy to hide it away with the cables around the PSU, or on cable management side of the case - which ever you prefer.

Hope it makes sense.. English is not my main language - was really struggling with finding suitable words to explain it :D

  • 8 months ago
  • 1 point

Haha :). Actually sounded quite fluent.

  • 11 months ago
  • 0 points

We could possibly work a trade for the founders card? I have a 1080 ROG Strix 3 fan custom card. Let me know.

  • 11 months ago
  • 2 points

No thank you. I've already had 1080 Strix A8G, and 1080 Seahawk.. im not gonna downgrade my TI.

  • 11 months ago
  • 1 point

that's fine figured I would offer